DIETZ GMBH - Federn, Biegeteile und Bauteile made in Germany

Germany

Factory icon Manufacturer/ Producer

DIETZ GMBH
Web icon
9 Products

Germany

Verified by Europages

Production to order – also with special-purpose materials as required: We only produce in accordance with customer specifications. Compression springs can assume a wide variety of designs and forms. Our production facilities include compression springs with wire thicknesses in the range of 0.30 to 3.00 mm with abraded ends and in the range of 0.10 to 4.00 mm with unabraded ends. Even extremely strict tolerances regarding length and strength are adhered to in our compression spring production facility. Special-purpose materials that meet specific requirements can also be integrated into production without any problems. Wire materials: All standard spring steel wires in accordance with EN 10270. Non-ferrous wires made of copper, brass and bronze. Special alloys such as: Hasteloy, CuNi44, NbZr1, TaW2. Other materials on request.

Request for a quote

Germany

Verified by Europages

Special eye forms for extension springs: There is an increasing number of potential applications for trumpet-end springs and mounting aids for extension springs – a solution that we have been addressing for many years now. We produce our range of extension springs with German and British standard eyes with wire diameters of 0.25 mm to 4.00 mm. We can also produce special-purpose eyes and other eye forms as needed according to alternative specifications with wire diameters of 0.20 to 4.00 mm.

Request for a quote

Germany

Verified by Europages

Customised production to your specifications: We work very closely with you when it comes to producing torsion springs. Torsion springs are produced in accordance with your specifications based on drawings, prototypes or sketches. We manage the development process of the spring until it is ready for serial production. We produce torsion springs with wire diameters of 0.20 to 4.00 mm, with or without torque testing. Wire coatings: Galvanised, ZnAl-plated, Red-coated, Nickel-plated, Polished nickel, Phosphated, Brass-plated,Silver-plated.

Request for a quote

Germany

Verified by Europages

Wave springs developed to order: We work closely with you in the development of our wave springs for the intended application. Where necessary, we are pleased to assist you with processes ranging from dimensioning to verification to production. With the help of our specialist expertise, we will find the right solution for you together. We produce both single-turn and multi-turn designs with wavy and straight surfaces.

Request for a quote

Germany

Verified by Europages

Bent wire parts represent a separate part of our production range. Bent parts differ from springs such as extension springs, compression springs and wave springs in terms of how they are produced. This type of spring is not only processed with automated machinery, but also involves a considerable amount of special handling, which we perform using our range of state-of-the-art equipment. Precision production with our high-tech machinery: Our range of machinery with an in-house toolmaking workshop enables three-dimensional bent parts to be produced with a wide variety of forms and with specialised finishes applied to the ends. Our range of machining processes includes: Bevelling, embossing, thread cutting, thread rolling, turning and milling. For bent wire parts, both CNC bending and mould-based bending are possible as production solutions.We process wire thicknesses of 0.20 to 8.00mm.Tool-based: 0.50 to 8.00 mm. Coating of part surfaces: Oiling, Vibratory finishing, Galvanisation.

Request for a quote

Germany

Verified by Europages

In our new production space, we have at our disposal 30 state-of-the-art automated punching & bending machines. In addition to bent wire parts, we also produce bent strip parts here. Production to order with complex forming: Bent strip parts are produced from a broad range of materials, including for instance stainless steel, alloyed or carbon steel, brass, copper, bronze, or even K55 or K75, a specially alloyed steel. We produce complex forms and assembly parts with a strip thickness of 0.15 to 3.00 mm and with a strip width of up to 120 mm; the strip thickness will be dependent on the material. Strip materials: Carbon steels, Stainless steels, Cold-rolled strips, Slit strips. Non-ferrous strips: Brass, Copper,Bronze,Special alloys such as K55 or K75. Strip coatings: Tin-plated, Galvanised, Silver-plated, Gold-plated, Painted, Partial coatings, Special coatings on request.

Request for a quote

Germany

Verified by Europages

We can produce the parts you require using specific tools or on special-purpose machines. We produce complex forms and assembly parts with strip thicknesses of 0.10 to 3.00 and with strip widths of up to 100 mm – depending on the material used. The manufacturing processes that we offer include: Punching, forming, embedding, welding, bolting, riveting and mounting. We perform the assembly of small batches by hand, while larger volumes are performed automated if you so wish. Our hybrid sub-assembly production includes the over-moulding of punched parts made of wire or metal with a variety of plastics or silicones. In order to ensure that the desired braking element features optimum properties, we make use of both the temperature durability and the haptic advantages of silicone and the weight advantage of plastic when combining these materials in this fashion. Guide tube assemblies, a combination of springs and tubes, are part of the hybrid component portfolio.

Request for a quote

Germany

Verified by Europages

With laser generation, components are built up layer by layer from powdered metallic materials used in serial production such as 1.2709 steel or 1.4543 steel. Thanks to state-of-the-art technology, this enables us to transfer your computer-generated 3D/CAD models reliably over to their physical form. Here, thin coats of the powder materials are applied to a base object before being melted using a laser into the desired contour. This process is continued on a revolving basis until the workpiece is complete with the final geometric form and the relevant functional properties. Incidentally, we reclaim excess powder material during this process and use all of it for later productions again. Our services in sample development also include technical springs, which we produce in small batches for your sample application. Traditional sample development services are a new addition to our portfolio. Here, we produce a small-scale series of your bent strip parts from original materials.

Request for a quote

Germany

Verified by Europages

To ensure safe transport and enable an easy handover of the products during later industrial processes and assembly, we ship our springs and sub-assemblies in special packaging. Any conceivable special packaging is adapted precisely to the product in question, e.g. blister or polyethylene packaging. Tube packaging: Compression springs are transported in tube packaging. Tube packaging ensures that they can be inserted without problems, down to the last spring. Sub-assemblies, bent strip parts and laser-generated samples are transported in blister or polyethylene packaging to protect them during transport and storage. Modifying specific extraction mechanisms: We would also be pleased to assist you with our expertise regarding the modification of specific extraction mechanisms. This eliminates downtime of highly complex assembly equipment caused by springs getting caught up in one another.

Request for a quote

Domain icon Manufacturer/ Producer

DIETZ GMBH

Am Floßgraben 10

96465 Neustadt - Germany

VAT No.
Contact