MANUAL LIFTER WITH LATERAL TILTER MOD. FP T8090 Lifter for pallet and boxes with hydraulic pump driven by steering shaft and lateral inclination up to 15°. Designed specifically to allow operators to withdraw/deposit products inside a container while maintaining an ergonomically correct position. The inclination can be made either to the right or the left. Sturdy steel frame with forks tip rounded, nylon steering wheels with brakes and protection for feet.
Italy
LIFTER PALLET TRUCK PANTOGRAPH MOD. FP JF W550 M WITH MANUAL LIFTING Lifter pallet truck pantograph with maximum lifting height mm. 800. Can be used as a standard transpallet but when the load exceeds 400 mm above the ground, stabilizers come into operation to prevent displacement. It is normally used in the operations of manual palletizing and de-palletizing to reduce physical exertion and increase productivity.
Request for a quoteItaly
ELECTRICAL ELEVATOR WITH FRONT TIPPING BY 85° FPLTM10E The elevator-tilter for dump boxes with hydraulic pump driven by the rudder allows operators to lift and fold up to a maximum of 85° each type of fork mounted container (plastic, metal, wood) and to withdraw/deposit products with maximum safety. The height of a pick-up is about 1000-1200 mm. (Depends on the level of tipping) and allows operators to maintain an ergonomically correct position. Equipped with sturdy steel frame with fork tip rounded, steering wheels in polyurethane with parking brake and foot protectors. OPERATION: After braking the wheels, for lifting it is sufficient to press the button on the rudder which regulates the ascent and descent of the forks. The tilting is done by pressing the buttonhole located on the rudder, the UP button tilts the load to the operator, while the DOWN button will lower it again.
Request for a quoteItaly
MINI PALLET TRUCK MOD. FP W380/800 WITH FORKS WIDTH MM. 380 Pallet truck with reduced dimensions, which is essential for the handling of pallets of mm. 600x400 (¼ pallet), exhibitors, speakers and generally for packages with size and height below the standard.
Request for a quoteItaly
ELEVATOR WITH MANUAL TIPPING FRONT A 85° FPLTM10M The elevator-tilter for dump boxes with hydraulic pump driven by the rudder allows operators to lift and fold up to a maximum of 85° each type of fork mounted container (plastic, metal, wood) and to withdraw/deposit products with maximum safety. The height of a pick-up is about 1000-1200 mm. (Depends on the level of tipping) and allows operators to maintain an ergonomically correct position. The trolley is equipped with a lever valve with two positions (lifting and tilting) Placing the lever on the lifting forks are raised horizontally up to 285 mm. from the floor, by positioning the lever on the opposite side starts tilting gradual up to a maximum of 85 °. Sturdy steel frame with fork tip rounded, steering wheels in polyurethane with parking brake and foot protectors.
Request for a quote