Falling Film Evaporator

The SMS thin film evaporator type HYVAP serves the increasing demand of the pharmaceutical industry for continuous concentration of heat sensitive, viscous and fouling products. Hygienic design for the pharmaceutical industry The HYVAP is a horizontal thin film evaporator that allows easy access and inspection of the interior and controlled and reliable CIP cleaning. The technology of the HYVAP combines the proven advantages of our conventional horizontal thin film evaporators DKH with the following new features: • Cantilever rotor design • Comfortable rotor extraction • No bearing in product space • Mechanical seal in hygienic design • Electro-polished surfaces • Sight glasses for inspection during operation The new HYVAP DZH offers the hygienic design that meets current GMP requirements. The evaporator sizes range from 0.1 m2 for laboratory to 2.0 m2 for industrial applications. LP steam as well as hot water can be applied as heating media.

Systems & Modules SMS designs, manufactures and supplies complete systems & modules for evaporation, drying and membrane applications. Our scope of supply includes: Consulting / Feasibility Studies Pilot Test Process Design Plant Engineering Project Management Procurement / Manufacturing / Delivery Erection / Installation Start-Up / Commissioning After-Sales Service Skid-Mounted Modules For more than 40 years SMS has been supplying skid-mounted units for the benifit of our customers. The skids are fully assembled, including piping, wiring and testing in the SMS Workshop or in our partners´ workshop. The modular design significantly reduces the required amount of work for assembly and start-up which minimizes the downtime of the existing plant equipment and - as a result - just minor effects occur on the current production.

For the thermal separation of a mixture a thin film is produced at the heated wall of a cylindrical or conical evaporator. A distribution ring on the rotor distributes the liquid evenly across the periphery. Then, the blades fitted at the rotor spread the liquid as a thin film of min. 0.5 mm over the heat transfer surface. The model concept for the flow in the thin film evaporator assumes that prior to each rotor blade a bow wave is formed. In the gap between the rotor blade and the heating surface, fluid is supplied from the bow wave of a highly turbulent area with intense heat and mass transport. This results in a good heat transfer performance even with viscous products. In addition, the formation of deposits is avoided and the intensive mixing also protects temperature-sensitive products from overheating.

Short path distillation is a thermal separation technology operating at process pressures in the range of 1 to 0,001 mbar. It lowers the boiling temperature and is an excellent method for gentle thermal treatment of heat sensitive, high boiling products. The short path evaporator consist basically of a cylindrical body with a heating jacket, a rotor and an internal condenser. The rotor creates a mechanically agitated, thin product film on the heating surface inside of the body. By means of gravity the product flows down in a spiral path, whereby the volatile portion of the product evaporates. The vapour passes by the shortest route and with practically no pressure drop to the internal condenser. The non-volatile portion reaches the lower part of the evaporator and is discharged through the bottom product outlet. The residual vapours and inert gases flow through the vacuum nozzle to the vacuum system.