Filling machine mod. Ultrafill 2 / 4

The automatic single-head cappers are designed to apply aluminum caps or screw-on and snap-on plastic caps to glass or PET bottles. All closure heads are made entirely of stainless steel, as well as most of the machine components. The speed variation is electronic, controlled by an inverter. Other capping systems are available to meet different needs: cork, crown, twist-off. It is also possible to combine 2 turrets on the same machine with different combinations, for example, screw cap + cork, cork + crown, screw cap + T-cork. The range of single-head cappers is designed for productions of up to approximately 2,500 bottles per hour and can be integrated with automatic cap feeding systems of both mechanical and pneumatic types.

The RTW600 is an automatic linear monoblock filling machine equipped with a distributor-orienter, an adjustable descent channel with a photocell for capsule presence detection, and a double jar stop for distribution and twist-off capsule capping. Hourly production capacity: approximately 800 jars/hour. Main features: -Stainless steel base on adjustable feet (or wheels). -2-meter-long linear conveyor belt with motorized drive and final accumulation plate. -Pneumatic group for container interception and separation. -Volumetric dosing unit suitable for dense liquids such as honey, fruit juices, jams, sauces, pastes, pâtés, dressings, melted cheeses, creams, etc., adjustable from 40 to 1000 cc. -Pneumatic capper with low rotational speed and adjustable torque. The machine does not require a format change for containers of different shapes and sizes, only for capsules with different diameters. Versions for higher productions are also available.

Isobaric filler for beer and other carbonated products, equipped with 5 filling valves and a bottle selection and transfer system using large-diameter stars. The filling valves are made of stainless steel with heat-sanitizable gaskets. The filling cycle is fully automatic, with an initial valve opening for counter-pressure, full opening for bottle filling, and decompression (degassing). The different phases and processing times are controlled by an electronic controller (PLC), with adjustments available through a touch-screen operator panel. An automatic capper is included for pry-off crown caps with a diameter of 26mm, with automatic cap distribution using a stainless steel hopper. The machine features a central 10-compartment star and bottle guide made of high-density polyethylene, with a safety microswitch. The machine's base is made of AISI 304 stainless steel. The indicative filling capacity with 0.33L bottles is approximately 700 bottles per hour.

The semi-automatic capper model 'TSP' is suitable for applying aluminum (or plastic) screw caps to glass bottles. This semi-automatic machine is made of stainless steel and features a pneumatic bottle lifting system. The caps are manually placed on the bottle, while the operation cycle is activated with 2 buttons on the side of the machine. The machine operates electrically with a contactor and CE-compliant safety guards. After the cap is threaded and sealed, the platen automatically descends, allowing the removal of the capped bottle and replacing it with another to be closed. The capping head has 4 stainless steel rollers and comes with a No-Cap No-Roll safety device, suitable for all types of closures, including Stelvin 30x60 caps. It is suitable for all standard bottle sizes ranging from 25cl to 150cl. A magnetic friction head is available for pre-threaded plastic caps or twist-off caps. Production capacity: approximately 600 bottles per hour.