Electric flow heater for heating liquids, vapour and gases. Complete with electric or electronic control and monitoring unit. Technical flow heaters Heating power up to 1,500kW/h Voltages up to 690V Nominal diameters up to DN500 Nominal pressure PN16 to PN100 available Please contact us if you have any questions regarding our flow heater or if you need further information.
Germany
CSN® PreHeater consists of one or more CSN® Flow Heaters, which are equipped with a valve and a pump, as well as standalone controller.Combustion engines requiring immediate operational readiness must be preheated before starting. The wellknown cold start problems are eliminated and the engine can be operated at full load from the beginning. Furthermore, cold start wear is considerably reduced. Typical fields of application for this type of preheater units are e.g. emergency power units (Diesel engine + generator) or locomotives and ships (Diesel engine for propulsion).Combustion engines requiring immediate operational readiness must be preheated before starting. The wellknown cold start problems are eliminated and the engine can be operated at full load from the beginning. Furthermore, cold start wear is considerably reduced.
Request for a quoteGermany
Electrical pocess heaters from 0,5 kW up to 1000 kW including pressure vessel, according ASME, PED or TR-CU. Gas heaters for natural gas, seal gas, fuel gas, industrial gas applications, process gas. Liquid heaters for oil, water and any process liquids. ATEX, IECEx, TR-CU certificates. Operating temperature up to 1000°C Operating pressure up to 500 bar
Request for a quoteGermany
Flameproof mini line heaters ATEX Ex II 2 G Ex’d’ IIC T4-T6 nach EN60079-0 und EN60079-1 The Exheat range of flameproof mini line heaters consist of a screw plug or flanged type immersion heater mounted in a thermally insulated heating vessel. They are designed to efficiently transfer heat to a flowing medium (liquid, air or gas). All flameproof heaters are fully ATEX certified and designed for use in zone 1 & 2 hazardous areas, gas group IIC.
Request for a quoteUnited Kingdom
The needs of the power generation industry include year in and year out reliability, optimum performance for maximum efficiency, and absolute on time delivery to meet plant outage schedules. All of the Jet Flow Boiler Feed Water Heaters are designed in accordance with HEI standards, TEMA and ASME codes. Jet Flow uses state of the art computer programs to perform the thermal hydraulic and mechanical design of each Feed Water Heater we fabricate. Jet Flow designs and manufactures both Low Pressure (LP) and High Pressure (HP) feed water heaters which may be installed either vertically or horizontally, depending on the plant design requirements. Each Jet Flow Feed Water Heater will contain from one to three separate heat transfer areas of zones including the Condensing, Desuperheating and Subcooling zones. Our heaters can be provided with multiple zones within the shell side Condensing Zone Included in all heaters,steam is condensed in this zone and non condensable gases are removed.
Request for a quoteCreate one request and get multiple quotes form verified suppliers.