Flow measurement & calibration: VMF®- VenturiMasterFlow®

Calibrate and adjust mechanical yarn brakes for the textile industry The test specimen is inserted in the UUT, which is mounted on a pneumatic slide. By pressing a button, the candidate moves to the running belt drive. The sample is then tested in different locking positions, the switching of the individual Paramtersätze is realized via a rotary switch. In each latching position, IO / NIO statement about the GMV2 light mounted on the column is displayed visually. After passing the examination, the tray will open again and the next candidate can be inserted. A speed controller as well as an ON / OFF switch for the drive are also integrated in the switch box under the GMV2. The entire inspection unit is mobile and complained to a height-adjustable lifting unit. The GMV2 and connect the switch are also mounted height adjustable in the profiles.

Development and construction of test systems for environmental simulation, i.e. climate and temperature tests as well as corrosion tests (e.g. MEMS testing and automotive durability tests on tilt sensors, inclination sensors, inertial sensors, inclination sensors, automotive parts and many more). - Adjustable humidity - Typical temperature ranges are -72 to + 120°C - Parallel testing and calibration of more than 100 DUTs simultaneously per test run - Various interfaces to the DUTs can be switched like CAN, LIN, Flexray etc. - Database connection and automated data analysis using Microsoft PowerBi can be added.

The Poppe + Potthoff impulse test stands test the operating or fatigue strength of various metal and plastic components. The endurance test in our high-pressure test systems simulates the life-cycle under varying loads. The failure tests thus show the potential weaknesses of the components with respect to design and material. The pressure is optionally modulated as a sine wave, trapezoid curve or needle pulse. Our test stands are characterized by a special ergonomics and are designed by Poppe + Potthoff machine design. Due to our flexible modular design, our machines are very variable, so that the pressure and volume range is designed according to the customer’s requirements. Of course, our systems are UL or CE compliant as required. In addition, we offer you service and support directly on-site.

Test toolings examples: SAFETY SUITCASE EQUIPMENT FOR INFLATING STATION AIRBUS: This equipment goes inside the plane with a connection via a false door to exchange information towards the command control writing desk. He allows to warn every person, located inside the plane, over the test progress by sound and bright signals. SWEEPING RADIAL DEVICE: The GASPRA system is a modular system allowing the probe positioning inside an engine to make pressure and/or temperature mappings. It has for characteristics a Radial road 300mm, and an angular movement at 90 °. CYCLEUR CABINET : This equipment is used in test bench during the engine plane qualification phase. It insures the endurance cycles creation and the progress. 6 sets have been created durung the qualification phase : LEAP 1A, 1B et 1C over several european sites: France, Belgium, Poland.