GEDA BL 2000 - Persons and Material Hoist

Wherever heavy loads have to be transported to great heights, the new GEDA BL 2000 P ensures the required efficiency in the industry. With a load capacity of 2000 kg or 23 persons and a max. lifting speed of 40 m/min, this permanent passenger and material hoist is the new powerhouse from GEDA. The fixed platform size of 3.20 x 1.45 x 2.10 m also allows transport of bulky goods up to a height of 250 m. For added comfort and operating convenience, the hoist is equipped with comprehensive state-of-the-art control variants. The GEDA BL 2000 P is perfectly tailored to the requirements in rough industrial environments. Maintenance and repair work can be conducted efficiently with the permanent passenger and material hoist.

The GEDA PH personnel and material hoist is now as a complete series available. Three standard versions have been developed up to now. All adjustable to desired specifications or conditions at construction site. Lifting height up to 400 m and three different lifting speeds and different car sizes are available. Both mast systems enable single and twin usage. You can choose between three standard control systems: stop next landing, single automatic or fully automatic. Different door systems in combination with the electrically and mechanically interlocked landing level gates round off the profile of the new PH range. The well-known engineered safety features like the over speed safety brake and overload protection or limit switches at the upper and lower level are of course part of the standard equipment. Of course the PH range is configurated according the new EN machinery directive 2006/42/EG or to national valid regulations.

New concepts for new markets is the banner under which the Bavarian construction and industrial hoist manufacturer GEDA-Dechentreiter GmbH & Co. KG presented a new personnel and material hoist, especially for markets outside Europe: The new GEDA SBL 2000. In contrast with other, variably adjustable hoist solutions from GEDA, the new GEDA SBL 2000 is therefore only available in a fixed platform size of 3.20 x 1.45 x 2.10 m, a standard load capacity of 2000 kg and 23 people, as well as a hoist speed of 55 m/min and a discharge head of 250 m. The title “Made in Germany” also stands for quality outside Europe. According to GEDA Managing Director Johann Sailer, it is important to stress in this context that with the GEDA SBL 2000 a product optimally tailored to meet the needs of target markets outside European has been developed and manufactured entirely in Germany. The GEDA SBL 2000 is available both as a single and a twin cabin.

The Multilift Comfort range can be used as enclosed hoist for people and loads all around the world without any restrictions. It has been designed to correspond exactly to the international regulations (e.g. EN 12159). You may exchange the standard automatic control with the optional, even more user friendly level pre-selection control. For safety reasons the 2.5m high enclosure is electrically and mechanically blocked. This means the door of the enclosure can only be opened when the hoist is in the base unit. The Multilift Standard range is in no way technically inferior to the Comfort series, but its use depends on the regulations in the respective countries it is used. The hoists are delivered with an electrically surveyed low enclosure. This means that you cannot make the platform leave the base unit or that the platforms stops when a door is opened. Assembly is not carried out from the roof.