Glue-303MS (hereinafter - "the Binder") is a one-component polyurethane binder for elastic elastic permeable coatings based on elastic aggregates (rubber crumb and EPDM-granulate). It does not contain organic solvents. It is cured by air moisture. When cured, it creates an elastic, durable bond with high moisture resistance. Appearance of components Homogeneous transparent colorless or whitish viscous liquid Dynamic viscosity of components at 70°С, Pa s 0.6-0.9 Content of non-volatile substances, % 100 Appearance of the cured coating Rough, elastic, permeable to water and its vapors surface. The degree of roughness depends on the fractional composition of the filler. Tensile strength of the cured coating, N/, within 8-10 (GOST 270-75) Elongation at break, %, not less than 350 (GOST 270-75) Coating curing time (at +20°С and 70% relative humidity) 24 hours – pedestrian loads can be provided; 3 – 5 days.
Austria
The corrugated board industry traditionally relies on corn starch and wheat starch. AGRANA corn and wheat starches are characterised by excellent adhesion and rapid initial tack, which is particularly important at high machine operating speeds.
Request for a quoteGermany
Working with the HB 950 is ideal if the hot-melt adhesive is applied from above. By hanging the hand gun on a balancer, you can work in a way that is gentle on the muscles and tendons. The safety and protection of the user are ensured by the insulation of the handle, which also does not transport any adhesive. A 1.2 mm bead nozzle is pre-assembled. The standard version has a PT100 temperature sensor, others are available on request.
Request for a quoteGermany
The Gecko Gripper (SP) enables the use of the innovative Gecko adhesive gripper technology in applications with a small surface area. Such areas which could not be automated so far. The gecko-inspired adhesive technology offers precise, track-free gripping. Even with porous workpieces this technology works. For example printed circuit boards or glossy surfaces. Cleaning is not necessary. The three different Gecko Single Pad Grippers (SP1, SP3 and SP5) are named after their payload in kilograms. Of course, the Gecko grippers can be used with leading lightweight robots and cobots. The compact single-pad design allows easy access to the workpiece, even in tight spaces. Since no electronics or air supply is required, the Gecko SP is a cost-effective plug-and-play solution. The Gecko gripper leaves no marks on glass. This eliminates the need for manual cleaning. This means a higher RoI and lower operating costs.
Request for a quoteGermany
Short description: With double syringe This transparent adhesive retains elasticity after curing and is ideal for jobs in construction and assembly and in fact in all cases where the use of WEICON Easy-Mix Systems would not be efficient. Viscid, self-levelling, very short pot life (3 - 4 minutes), fast-curing, almost colourless, glass clear. WEICON Epoxy Minute Adhesive is especially suitable for occasionally necessary repair and maintenance works. It is applied by using the practical double syringe. This means that resin and hardener are delivered automatically in the right proportions. After this, the mixing is done manually.
Request for a quoteCreate one request and get multiple quotes form verified suppliers.