Heat-resistant Scraper

The heated scraper from FTK Förderband Technik Kilian GmbH is equipped with a heater and thermal oil, which prevents the material from freezing on the scraper, both the lower belt and the drum scraper. The heated scraper is particularly suitable for the cold season and at high minus temperatures.

The FTK Förderband Technik Kilian GmbH quick cleaning scraper is a special device to remove the scraper, whether drum scraper or lower belt scraper, from the conveyor belt as quickly as possible and to clean adhering materials. Tools are no longer required. Can be used, for example, in the area of ​​film and paper recycling. Can be carried out by untrained personnel in just a few steps and without tools.

Conveyor belts are often used to transport bulk materials over long distances, especially in the stone, soil, mining and brown coal industries. Despite good scrapers, material residue often remains on the conveyor belt because of striations and minor damage. The result large amounts of material accumulate beneath the conveyor belt system in the area of the return rollers, and have to be removed by costly cleaning work involving many workers. FTK TURN Operating principle The FTK TURN belt turning station made of highly wear resistant polyurethane turns the conveyor belt through 180 degrees after material transport directly in the reverse direction or into the lower drum. Because of the turning process, the inner, clean side of the belt which never comes into contact with the transported material now has its surface facing down towards the ground. Cleaning is a thing of the past!

Knocker rolls are used on the cleat belt in order to knock off adhering material. The Knocker roll is fitted in the inner belt near the drive pulley. Area of use cleat belts and badly damaged belts Knocker rolls are used when it is not possible to use conveyor cleaning brushes. They can also be used as combination together with a conveyor cleaning brush.