Heat Exchangers

Double tube heat exchangers (also known tube-in-tube) are designed whereby one tube is concentrically positioned within a larger tube. The double tube composition allows for unrestricted flow of product, making it the ideal heat exchanger for viscous products. The product flows through the inner tube and the service fluid flows through the surrounding shell.

Efficient use of waste heat (up to 1.000 °C) In many production processes waste heat occurs in form of hot air which is put out to the environment without any use. Very often these hot gases are contaminated air. On the other side clean (cold) air must be warmed up for the production process. In these cases cross flow heat exchanger can reduce the energy costs. The hot air stream will be conducted in the cross or counter flow method over the cold air inside the cross flow heat exchanger. Though both air streams are strictly separated because of the construction of the heat exchanger and they don´t get mixed (leakage less than 0,5 %). Only the energy of the hot waste stream is transferred to the cold clean stream.

Waste water treatment plants and surface waters have enormous energy potential. A sewage treatment plant, for example with 90 million litres of wastewater daily, reducing the wastewater temperature by using heat exchanger by around 1°C, generates a power of about 4.3 MW. The comparative potential for energy recovery from the surface water is even higher. Environmental aspect Induced by humans, water temperatures of the surface and streams have steadily increased, not least owing to the inflows from sewage water treatment. This has serious consequences on the flora and fauna. If heat is extracted from purified water in the sewage treatment plant or from surface waters and from streams, and water temperature is thereby reduced, this will have a positive effect on the entire ecological system. With KASAG heat exchanger systems, on the one hand, the energy requirement of the sewage treatment plant can be covered and, on the other, buildings in near vicinity can be heated or cooled.

The EcoMaster D 1502 Classic is ideally suited to the external cleaning of tanks up to the removal of dirt and corrosion, for example, as well as the removal of coating. All Classic devices are fitted with robust, low maintenance and strong performance WOMA high pressure pumps. The compact design with stable frame construction enables easy usage in difficult areas. Fitted with crane hooks a simple transportation is guaranteed. Effortless regulation via optional manual pressure control or Dump Gun is possible and the large water tank ensures a calm water cycle. The Ecomaster Clasicseries brings a very good price performance ratio thanks to functional construction and proven mechanical components combined with low operational costs due to high service life, minimal maintenance costs and simple servicing.