Immersion heaters

Immersion heater ATEX II 2 G/D EEx d IIC T1 – T6 The Exheat „RFA-C” range of flameproof removable core heaters offers a hazardous area heating solution for oil and similar applications where low heat density is required. The element can be withdrawn for inspection without system drain down. The standard heater consists of a single element core fitted into a mounting flange. A robust EEx d terminal enclosure protects the electrical connections. The watts density of the element core fitted depends upon the media to be heated and the kilowatt rating required.

Immersion heater ATEX II 2 G Ex d IIC T3 – T6 ATEX EN60079-0 und EN60079-1 The Exheat „RFA” range of flameproof rod-type immersion heaters is suitable for installation in process tanks, safety showers, engine sumps, pressure vessels and similar plant, located in zone 1 and 2 Hazardous Areas where flammable atmosphere is a group IIA, IIB or IIC gas. They are suitable for heating all process liquids or gases which are non-corrosive to the materials of construction.

Hazardous area „L" immersion heater ATEX EEx e + EEx d T1 – T6 The “ISES-L” and “FP/BFP-L” series of hazardous area immersion heaters are ideally suited for installation within process tanks, sited in zone 1 or 2 hazardous areas. The design of the heater provides horizontal mounting of the elements, beneficial for low liquid level applications but allowing vertical installation which facilitates withdrawal from the vessel top. This design of heater is particularly for heating for heating the contents of underground storage tanks.

Flameproof immersion heaters ATEX II 2 G/D EEx d IIC IECEx Exd IIC T1 – T6 Ex tD A21 IP66 T…°C The EXHEAT “FP-C” range of flameproof core immersion heaters offers a hazardous area heating solution for oil and similar applications where a low heat density is required. The special element / sheath arrangement allows the element cores to be withdrawn for inspection without system drain down. The standard heater consists of a number of element cores fitted into a mounting flange. A robust EEx d terminal cover protects the electrical connections. The number of elements fitted depends upon the media to be heated and the kilowatt rating required. Dependent on application, the heater can be provided with temperature control by contactor or thyristor.