EWS.Slot
Groove Punching, Internal and External Toothing
Description
Keyway broaching on lathes is a common thing. What is new is to speed up this operation with low stress for the machine! Slot is driven by the tool turret of the machine, with the input rotary motion being converted to a translation with superimposed lift-off function. This makes programming extremely easy. The keyway broaching unit is positioned in the prepared bore – in such a way as to make the extended tappet oriented to the end position in the Z axis. The depth of the slot is produced by a constant X-feed moving between 0.04-0.08 mm/stroke. The speed of the spindle ranges between 400 R/min – 1,000 R/min, with one rotation corresponding to a complete stroke. This way, for instance, a feather key groove with a width of 6 mm and a depth of 5 mm is produced within 7.5 sec. (800 R/min and 0.05 mm feed/rotation). With this operation it is important that the chip can break at the end of the groove, that is that a cut-in or a bore exists.
- Milling - machine tools
- cnc tools
- toolholder
- machine tools for metal forming
Similar products from EWS WEIGELE GMBH & CO. KG
EWS WEIGELE GMBH & CO. KG
Germany
EWS goes milling With its latest range of angular heads, EWS brings its trusted technology with new features to machining centres. The system range was presented to the public for the first time at EMO 2015. An elegant design houses high-performance technology, or to put it simply Precision meets Motion. Advantages: the smart solution for compensating for there not being a machining axis Machining hard-to-reach parts Centre boring stepless angle adjustment around the horizontal axis, with tangentially acting double cone clamp MR > 250 Nm Prerequisite: The prerequisite is a "stop block" on the machine. This prevents the entire unit from turning while simultaneously defining the position of the angel of rotation. Variations: basic duplex offset Request form: PDF
EWS WEIGELE GMBH & CO. KG
Germany
High-speed thread cutting with reversing kinematics The new EWS Tapmatic thread cutting head for driven tools enables thread cutting processes without having to reverse the direction of rotation thanks to its reversing kinematics. This saves time and energy and protects the motor – all this with a defined depth of thread. The units are available for M3-M12 threads.
EWS WEIGELE GMBH & CO. KG
Germany
Emulsion can do more than just cool... At least when using EWS Spinjet, the coolant is used to drive a turbine which allows the tool to rotate to up to 50,000 rpm, depending on the type. The turret's tool drive stops moving during this process! See the attached flyer for the technical requirements and details. Download Manual: PDF
EWS WEIGELE GMBH & CO. KG
Germany
Trifix® is the new adjusting system for Gildemeister multi tasking machines. The double sided adjusting system is guided by a very precise key way at the surface of the turret. The plates are preloaded, and the resiliency in the adjusting system eliminates static redundancy. This allow the exact position of the tool to be secured and significantly reduces the setup time of the machine. Because this is a highly sophisticated precision instrument it is not possible to use double serrated tool shafts. The tool is supplied fully adjusted and can be used right away. EWS is the DMG system partner for this tool generation. Trifix® advantages: Repeat accuracy below 6 µm at radius of 200 mm High positioning accuracy from one station to another (0.01 mm) Driven tools and static tool holders are completely aligned Static tool holders can be used together with additional drill pattern for mounting Heavy duty spindle noses can be used together with additional d