Level measurement
Description
Leves complement ideally to flow measurements, since each flow is coming from a container or is pumped into a tank or container. For this the level information is extremely important because through these pumps and valves can be controlled, so that the flow can be measured with high reliability. In case of emptying tanks, the pump power can be reduced, so that the risk of air in the pipes is reduced. This in turn would affect the measurement. During tank filling can by throttling the power of the pump a overfilling be avoided so that the full capacity of a tank can be exploited. The level measurement in combination with the flow measurement complement each other ideally, if the measured information are processed together and evaluated. The plant availability is held high, because in case of failure or maintenance of a measurement, the other still works. Energy optimized, high-frequency electromagnetic impulses, generated by the electronics, are propagated along the probe (single rod..
Similar products
ENVEA
France
Radar sensor for measuring the level in silos and containers. Available for silos up to 120 m height. Can be used for a wide variety of materials, regardless of the size or composition of the material. • 80 GHz allround sensor • continuous measurement • maintenancefree operation through noncontact measuring principles • reliable measurement independent of vapour, dust and noise
STRATE TECHNOLOGIE FÜR ABWASSER GMBH
Germany
Pressure sensor for analogue filling level measurement Especially suitable for STRATE sewage pumping stations for municipal applications Supply voltage 24 V DC Output of an analogue measuring signal 4 – 20 mA Pressure ranges depending on tank height 0 – 200 or 0 – 400 mbar Safe at several times over-pressure Explosion protection according to ATEX
BDSENSORS GMBH
Germany
BD\SENSORS has developed the LMK 307T for continuous level and temperature measurement in water or waste water applications. The advantage: simultaneous recording of level and temperature with separate independent signal amplification. The maintenance and wiring costs are considerably reduced. In addition to classical signal processing of the level, an additional signal circuit independent of the level which converts the temperature signal into a 4 ... 20 mA analogue signal in 2-wire technology is provided. Features: — nominal pressure: from 0 ... 4 mH2O up to 0 ... 250 mH2O — nominal temperature from 0 ... 30 °C up to 0 ... 70 °C — accuracy: 0.5 % FSO — diameter 27 mm — separate output signals for pressure and temperture ranges — excellent accuracy — easy handling — low maintenance and wiring costs Optional Features: — different kinds of cables — different kinds of seal materials — customer specific versions
Request for quotes
Create one request and get multiple quotes form verified suppliers.
- Only relevant suppliers
- Data privacy compliant
- 100% free