Lightweight gypsum-based machine and hand plaster

SPRINT is a gypsum-based machine plaster for one-layer application on interior walls and ceilings in premises with normal humidity. It is intended for making surfaces that are ready for painting, laying wallpaper or proper decorative plasters and finishing skim coats. Application: • Suitable for machine and manual laying application • Perfect for laying on oven and red bricks, cement and lime-sand blocks, roughened concrete Advantages: • Suitable for machine and manual laying • With up to 30% light weight than lime-cement plasters • High smoothness • High level of gypsum maximum elasticity without cracks • Healthy environment that controls moisture TECHNICAL INFORMATION: In compliance with EN 13279-2:2014 : Type B1/50/2 • Paper bag: 30 kg • Mixing Ratio: ~ 18 l water: 30 kg • Coverage: ~ 2.7 m²/ 30 kg • Consumption: ~ 11 kg/m²/10 mm • Bond strength: 0.15 MPa • Bags per pallet: 40 pcs • Pallet weight: 1200kg

Quickly binding building gypsum for direct application. It is used for filling holes, mounting electrical installations, skimming rough coatings, or other proper substrates with normal bearing capacity. Application: • Fixing of electrical cables • Suitable for complete skim coating • Suitable for bonding gypsum ornaments Advantages: • Compatibility with all types of masonry and concrete works • Excellent adhesion • High resistance • Fast gathering of strength • Easy and effective work TECHNICAL INFORMATION: Mixing Ratio Coverage Consumption Bags per pallet Pallet weight (gypsum/water) 5 kg 1/0.55 ~ 5 m2/ 5 kg 1 kg / m2 / 1 mm 120 pcs 600 kg 25 kg 1/0.55 ~ 25 m2/ 25 kg 1 kg / m2 / 1 mm 40 pcs 1000 kg

FUGA is a gypsum-based jointing compound for manual jointing with a joint tape of plasterboards. It is suitable for complete skim coating or filling small cracks. Application: • For filling and finishing joints between gypsum boards • Suitable for complete skim coating • Filling of small cavities and repairs • Application in premises with normal humidity Advantages: • High level of smoothness and smoothness of joints • Economical and easy to work with • Provides strong and durable bond between boards • Limited shrinking during storage TECHNICAL INFORMATION: In compliance with EN 13963:2015 : Type 3B • Paper bag: 5 kg / 25 kg • Mixing Ratio: ~ 2.8 l water : 5 kg | ~ 13.5 l water : 25 kg • Coverage: ~ 16 m²/ 5 kg | ~ 83 m²/ 25 kg • Consumption: ~ 0.30 kg/m² • Bond strength: 0.3 MPa • Bags per pallet: 120 pcs / 40 pcs • Pallet weight: 600 kg / 1000 kg

FUGA HYDRO is a moisture resistant joint filler for manual skim coating and jointing with a joint tape of plasterboards in premises with high humidity. Application: • For filling and finishing joints between Moisture resistant plasterboard types H2, DFH2, Titan Board, or Blue Board • Suitable for complete skim coating • Application in premises with increased humidity Advantages: • High level of smoothness and smoothness of joints • Provides strong and durable bond between boards • Limited shrinking during storage TECHNICAL INFORMATION: In compliance with EN 13963:2015 : Type 3B • Paper bag: 5 kg • Mixing Ratio: ~2.8 l water / 5 kg • Coverage: ~ 16 m2 / 5 kg • Consumption: ~ 0.3 kg / m2 • Bond strength: 0.3 MPa • Bags per pallet: 120 pcs • Pallet weight: 600kg