MALVIN SRL

Premixed, high elasticity, anti-carbonate, thixotropic, water-repellent, fibro-reinforced, shrinkage compensated to EN 1504-2 and EN 998-1 based on special hydraulic binders, suitable for universal use on any compatible substrate. For the external and internal smoothing of concrete surfaces, of rustic, plastic and / or mineral coatings, of traditional or premixed plasters based on lime and cement, both new and old, even if painted, provided they are in excellent condition, of plasters that present shrinkage lesions, concrete block walls, autoclaved cellular concrete, coatings in polystyrene panels, polystyrene (also embossed), polyurethane, cork, cement wood. To uniform plastered surfaces with different mortars. As a bonding base for coatings in polystyrene panels, polystyrene (also embossed), polyurethane, cork, cement wood. Used as a shave on coatings, it can be used as a decoration for MEHLVIT ELS / PLUS or AGROPOLI ELS / PLUS elastomeric water-based paint.

Anti-shrinking, anti-carbonate, thixotropic, fibre-reinforced anti-carbonate mortar based on special resistant sulphate cements, in compliance with EN 1504-3 Class R3 or R4-CC, with high mechanical resistance and high adhesive power on steel and concrete. Waterproof and insensitive to chemical attack, resistant to sulphates. It is applied for the recovery of deteriorated concrete and the reinforcement in general of concrete. INTORIS MT is specifically thixotropic for spray or trowel restoration for vertical restoration operations. Available in R3 or R4-CC class. Available type "P" to be used without protective treatment to eliminate the armor stops. FPC 0925 production process certificate.

INTOCALCE ST 10 Bio-mortar eco-friendly with high resistance, with compressive strength CSIV in accordance with EN 998-1, M10 and with EN 998-2 and R1 compliant with EN 1504-3, based on natural hydraulic lime NHL compliant with EN 459-1 and metakaolins, specific for structural uses. INTOCALCE ST 15 Bio-mortar eco-friendly at high resistance, with compressive strength class CSIV in accordance with EN 998-1, M15 with EN 998-2 and R1 with EN 1504-3, based on natural hydraulic lime NHL compliant with EN 459-1 and metakaolins, specific for structural uses.

Light-weight premixed structural concrete, standard UNI EN 206-1 with resistance class LC 20/22 type CLS 1.4; class LC 30/33 type CLS 1.6; class LC 40/44 type CLS 1.8 based on hydraulic binders and hollow spheres of glass, for indoor and outdoor use. To be applied by mechanical projection or by hand for lightened structural concretes in general. It does not corrode metals but protects them if wrapped completely. To be used for internal and external structural castings, for concrete in general with lightness and high resistance characteristics, for collaborative castings on slabs in Putrelle/Laterizio, laterocement, Wood. Type CLS 1.4 Available for quick drying type "R". FPC 0925 production process certificate.

Macroporous Eco-frendly Bio-plaster based on natural hydraulic lime, NHL 3.5 or NHL 5 according to EN 459-1, for plasters for dehumidification, for indoors and outdoors. Available fibre-reinforced with a special composition of polypropylene fibres specially formulated "FR" type and repellent type "I". Recyclable as inert at the end of life. Specifically for the preservation of historical artefacts. Ideal for the rehabilitation and recovery of old and new walls, internal and external, subject to humidity for capillary ascent and in the presence of efflorescence of salts, underground environments not subject to infiltration of water, buildings of historical interest, churches and In any case a definitive and natural dehumidifying cleansing treatment is necessary. Anab-ICEA Certified according to UNI EN ISO 14024 Environmental labelling type I.

It is an eco-friendly bio-mortar, fibrated with a special composition of fibres tested for the specific use, based on natural materials as cork granules and natural hydraulic lime compliant with EN 459-1 for insulating base coat screeds, soundproofing and dehumidifying, inside and outside with an high and constant quality level, produced with an automated system, to apply with a plaster sprayer, screed pump or by hand. The natural hydraulic lime ensures an hydraulic hardening very slow and constant that allows to obtain screeds with an high durability and breathability. Form no vapor barriers and contains no solvents. Recyclable as inter at the end of its life.

Premixed plaster fire-proof based on special hydraulic binders and light mineral aggregates for application inside and outside, for the fire protection of walls and slabs and in particular of metal structures or in reinforced concrete and metal canalizations, with an high and constant quality level, produced with an automated system, to apply by hand or by mechanical projection on the thickness correspondent to the grade of security desired.

Lightweight premixed screed, conforming to the minimum environmental criteria. based on hydraulic binders and expanded polystyrene beads, with compensated shrinkage and controlled drying, ideal for hand-or machine-making of background screed Thermal insulation to be applied directly on any internal and external surface, provided that it is stable and not subjected to capillary ascent suitable to receive the subsequent application of any type of screed even with interposition of insulation mats, Acoustic noise, suitable for the thermal insulation of roofs, for lightening jets or fills.

Premixed self-levelling screed, based on hydraulic binders, fibro-cocked, with special polymeric extruded aggregates, with compensated shrinkage and controlled drying, ideal for the realization by hand or machine, even with plastering machines. to be applied directly on any internal and external surface, provided that it is stable and not subject to capillary ascent, suitable to receive the next Application of any paving such as ceramics, terracotta, natural stones, parquets, carpets, rubber, etc.; Suitable for the realization of screed with insertion of underfloor heating and floating scree on a resilient mattress for the acoustic insulation of footstep noises

Premixed adhesive based on cement class C2 TE S1 for the indoor and outdoor installation of floor and wall coverings, with high workability, extended open time and increased adhesion and good capacity to absorb the substrate’s deformation, zero vertical slip. Specific for floor and wall coverings also non-absorbent, natural stones, overlapping non-absorbent materials, large formats on large surfaces screeds with insertion of underfloor heating, for application of porcelain stoneware at low thickness.