MC56F8366VFVE Freescale / NXP

The PIC18F8527-I/PT is a 8-bit microcontroller from Microchip Technology. It is based on the PIC18F core and features 48KB of Flash memory, 24K x 16, and a 40MHz operating frequency. It is housed in an 80-TQFP package with a 12x12mm footprint. The device operates over a temperature range of -40°C to 85°C (TA). Features: • 8-bit PIC18F core • 48KB Flash memory, 24K x 16 • 40MHz operating frequency • 80-TQFP package with 12x12mm footprint • Operating temperature range of -40°C to 85°C (TA) Applications: The PIC18F8527-I/PT is suitable for a wide range of applications, including automotive, industrial, consumer, and medical. It can be used for motor control, power management, data acquisition, and signal processing. It is also suitable for embedded systems, such as those used in home automation, security systems, and robotics.

AT89C51RD2/ED2 is high performance CMOS Flash version of the 80C51 CMOS single chip 8-bit microcontroller. It contains a 64-Kbyte Flash memory block for code and for data. The 64-Kbytes Flash memory can be programmed eitherin parallel mode or in serial mode with the ISP capability or with software. The programming voltage is internally generated from the standard VCC pin. The AT89C51RD2/ED2 retains all of the features of the Atmel 80C52 with 256 bytes of internal RAM, a 9-source 4-level interrupt controller and three timer/counters. The AT89C51ED2 provides 2048 bytes of EEPROM for nonvolatile data storage.

The Atmel® AT25DF641 is a serial interface Flash memory device designed for use in a wide variety of high-volume consumer based applications in which program code is shadowed from Flash memory into embedded or external RAM for execution. The flexible erase architecture of the AT25DF641A, with its erase granularity as small as 4-Kbytes, makes it ideal for data storage as well, eliminating the need for additional data storage EEPROM devices. Features • Single 2.7V - 3.6V Supply • Serial Peripheral Interface (SPI) Compatible – Supports SPI Modes 0 and 3 – Supports Atmel RapidS Operation – Supports Dual-Input Program and Dual-Output Read • Very High Operating Frequencies – 100MHz for RapidS – 85MHz for SPI – Clock-to-Output (tV) of 5ns Maximum • Flexible, Optimized Erase Architecture for Code + Data Storage Applications – Uniform 4-Kbyte Block Erase – Uniform 32-Kbyte Block Erase – Uniform 64-Kbyte Block Erase – Full Chip Erase • Individual Sector Protection with Global Protect

The Microchip ATXMEGA32A4-AU microcontroller is suitable for a wide range of applications, including automotive, industrial, consumer, and medical. It can be used for motor control, power management, data acquisition, and communication applications.