MIX AS - Aquaturbo

The EUROMIX® vertical shaft floating agitator is designed for all mixing applications and operates at 1000 rpm. The liquid rises to the surface of the tank and discharged at the base. The EUROMIX® flow-guide pipe allows the fluid to be directed to the base of the tank and can be used for deep tanks. The specific flow created ensures the mixing of the liquid. The general basis of the mixing being vertical, the water is directed at very high-speed causing a laminar flow by the agitation unit at the tank base. The EUROMIX® thus prevent the formation of dead zones in the tanks. It prevents sedimentation and rapid settling in holding and mixing tanks.

Multi-purpose, multi-directional, submerged mixer ideal for general mixing and flow generation; adaptable to many tank configurations. Open, dual helical impeller providing intensive; directional sub-surface mixing pattern with minimal surface disturbance and low power to volume performance 1.5 – 22KW Drive Motors 4 + 6-Pole Speeds, Direct Drive AISI 304/316 or other SS Submersible motor – ip 68 protection High quality, low maintenance motor Robust + compact design – minimal vibration Easy installation + removal Directional mixing + flow generation plus general mixing of lagoons Basins + tanks activated sludge processes vey large surface area reservoirs Denitrification + sbr + asp

Exceptional mixing performance for both low and high solids concentration solutions. Intensive, low-energy, 360 - degree mixing pattern and totally non-clogging impeller. 1.1 – 30KW Drive Motors 10-42 rpm Geared Drive AISI 304/316 or special SS Fixed Bridge + Floor Mounted High efficiency mixing of basins + tanks Activated-sludge processes Denitrification + sbr Also ideal for deep tanks + high mlss Intensive low energy to volume mixing Totally non-clogging design Minimal noise output Robust design – low maintenance

The FRMD is used to remove the upper layer of foam, oil or fats. The natural flow within the basin, together with the suction of the pump, attracts the surface of the water towards the center of the FRMD. An adaptable floating weir allows the upper layer to enter the pump and be removed from the basin. The weir and the submersible pump are mounted on a robust floating structure held in place by cables and springs or guiding tubes. Depending on the application and the geometry of the basin, the FRMD can be mounted together with a MIX SL (directional submersible mixer) or MIX-AS (floating downdraft mixer) to help the flow towards the weir. Applicable for removal of oil, fats, bulking + aging sludge, recycling of scum in sludge stabilisation + biogas, SBR and ASP tanks.