Germany
Manufacturer/ Producer
Germany
Manually controlled systems In manual systems, goods are moved through the system by hand or using a chain hoist. A hardware controller is used to set and monitor the individual bath parameters. Upon request, a small PLC can be installed for regulation and logging purposes. The electroplater sets the exposure time for the individual baths on each bath. The quality of the individual process steps, and therefore the parts themselves, is therefore greatly dependent on the precision of system personnel. Manual systems are used when semi- or fully automated operation would not be reasonable from an economic or technological standpoint.
Request for a quoteGermany
Automatically controlled systems In automated systems, parts are moved through the plant using a hoist in a fully-automatic, PLC controlled process. The bath parameters, the exposure time for parts in the baths, and the process steps are all saved in the PLC. The system runs through the process fully automatically. Operating personnel are primarily responsible for monitoring the system. Fully automated systems can significantly optimize manufacturing processes for small and large-scale series production through precision and economic efficiency (consumption quantities, energy management).
Request for a quoteGermany
Specialized systems Our main focus, and our core area of expertise, is developing and designing systems optimized around individual customer requirements. Whether these are process technology, safety-related, or quality assurance criteria – our broad production expertise from draft to assembly provides us with the best possible flexibility. We always consider all peripheral system equipment, such as water and media supply equipment, air supplies and exhaust systems, or specialized testing systems and associated documentation. Our systems are designed to provide the best possible energy and material efficiency.
Request for a quoteGermany
Supplementing material properties Whether it’s the automotive industry, medical technology, or machine construction: the demand for material and resource-saving development runs throughout many industries. New, lighter weight materials and new kinds of material combinations offer possible solutions. However, such solutions frequently require a specialized surface coating that balances material properties, technological requirements, and specialized operating conditions to be successful. This balancing act places high demands on system technology, which must ensure these key attributes for ever more complex components in perfectly controlled processes.
Request for a quoteAs a manufacturer of custom-produced plating and industrial plants, we have focused on individual planning and manufacturing tailored to customer and process specifications since the company was founded. Our work is shaped by our experience and extensive, detailed knowledge gained from decades of building systems for a wide variety of industries. After gradually expanding production, and following an extensive planning process, we built a new company facility at our headquarters in the Franconian town of Allersberg in the spring of 2016. We combined manufacturing areas previously housed in different buildings into one production facility almost 5, 000 sq.m in size. This allows us to optimize internal processes and shorten coordination channels. Today, our team is made up of around 70 qualified and ambitious specialists, supporting and serving our customers around the world. The broad scope of our production expertise gives us the best possible flexibility – from planning department drafts to on-site installation.
Manufacturer/ Producer
Neumarkter Strasse 40
90584 Allersberg - Germany
Germany
Plasma systems from Diener electronic have long since established themselves in a wide variety of industrial sectors. With the PlasmaBeam PC atmospheric pressure plasma system, you can rely on modern and future-proof plasma jet technology under atmospheric pressure. Due to the treatment width of 8 - 10 mm, substrates can be precisely treated locally. PlasmaBeam technology can be used for inline processes. With the help of robots, 2 or 3-dimensional surfaces can be treated. PlasmaBeam enables local surface cleaning without masking the rest of the surface. For example, cleaning before wire bonding and various processes in the electronics industry. Furthermore, the PlasmaBeam PC is suitable as a pre-treatment device for the following processes: Gluing, bonding, printing, laminating, soldering, welding, flocking. The following surfaces can be treated with PlasmaBeam: Plastics, rubber, metal, glass, ceramics, hybrid materials.
Request for a quoteGermany
Plasma systems from Diener electronic have long since established themselves in a wide range of industrial sectors. With the Tetra 1440 low-pressure plasma system, you can rely on modern and future-proof cold plasma technology in a vacuum. The chamber volume of approx. 1440 litres of this plasma system offers enough space to serve series production. Low pressure plasma treatment is a proven technique for controlled ultra-fine cleaning, adhesion enhancement (activation and etching) and coating of thin films on substrate surfaces. Plasma is generated by applying high-frequency voltage in the vacuum chamber. In the process, the process gas introduced there is ionised. Fields of application: VOC-free cleaning of organic residues Activation before painting, gluing, potting, ... Etching of PTFE, photoresist, oxide layers, ... Super-hydrophobic and -hydrophilic coatings
Request for a quoteGermany
The machine structure with solid base plate is extremely compact and stable. All necessary components are integrated in the machine housing: mechanical axes, pneumatic components, control with drive electronics and mounted 12 "touch display. Depending on the desired version, the F-Décor 305 can produce surface patterns like circular grainings, côtes de Genève, engravings or decorative millings on mechanical watch parts. The machine guarantees high precision and high productivity. The F-Decor 305 is delivered ready for connection with either 1 or 2 working spindles.
Request for a quoteGermany
Plasma systems from Diener electronic have long since established themselves in a wide range of industrial sectors. With the Tetra 45 low-pressure plasma system, you can rely on modern and future-proof cold plasma technology in a vacuum. The chamber volume of approx. 45 litres of this plasma system offers enough space to serve series production / automation. Low pressure plasma treatment is a proven technique for controlled ultra-fine cleaning, adhesion enhancement (activation and etching) and coating of thin films on substrate surfaces. Plasma is generated by applying high-frequency voltage in the vacuum chamber. In the process, the process gas introduced there is ionised. Fields of application: VOC-free cleaning of organic residues Activation before painting, gluing, potting, ... Etching of PTFE, photoresist, oxide layers, ... Super-hydrophobic and -hydrophilic coatings
Request for a quoteCreate one request and get multiple quotes form verified suppliers.