Magnetometer - MD200

The T610 is a handheld measuring instrument from the Trotec MultiMeasure family, used for quick non-destructive moisture measurement up to 300 mm. Another advantage of the process, aside from the measuring depth, is its independence from the level of salt content in the material. This creates no dissimilarity to the microwave technique, whether it is an older or a new building being gauged. Since the unit’s screen can show two values, for purposes of results evaluation, a function value can be indicated at the same time as the present measured value, if needed. The T610 moisture meter can be linked to a PC through a USB cable. Due to the MultiMeasure Studio Software, the gauged values of the device can be transported online and in real time to the PC. A few practical benefits: German industrial design in robust, premium two-component construction with IP54 type of protection

The PD200 is a professional impulse current measuring system to detect leak (holes) in non-conductive sealing systems and is suitable for leak detection on balconie, pond liners/swimming pools or flat roofs. In contrast to the previous model PD100, the PD200 has extremely compact dimensions - the size of the device could be reduced by more than 30%! These compact dimensions enable the transport of the PD200 e.g. through so-called safety ladders to the corresponding flat roof.The impulse current measuring system easily wins the weight comparison with its previous model. Although the single components partially are pretty heavy (e.g. the transformer), the total weight could be reduced by about 20% (from 11.2 kg to 8.6 kg). On top of the housing there are clearly visible signal lamps - one standard impulse signal (green) and one short-circuit signal (red), incl. integrated tone generator.

The T660 is a moisture meter that you can connect to a PC with the use of a USB cable. The MultiMeasure Studio Software, free in the service/ download section of company website, can be used to measure values from the T660, online and in real time on any PC. The values of this item can be saved for later analysis and for use in report. There are a few practical benefits, with the measuring device being designed and produced in accordance to the highest quality standards. There are two premium components, constructed with the IP54 rating. The item comes with an easy to lean glass surface made of high scratch-resistant. The capacitive touch screen control panel and the high resolution color display for simultaneous indication of two measured values is another major advantage, while the quick and non-destructive determination of near-surface moisture distribution is another major advantage.

DL200P professional data logger is used for inspecting production processes, reliable climate logging, determination of material moisture and practical data readout using externally connectable sensors and USB or LAN. The USB adapter supports long term logging. The instrument is provided with external measurement sensor for measuring surface, air and material temperature and wood and building moisture, internal sensor (temperature) working on NTC principle measures in the range 20 °C to +50 °C, accuracy of ±0.3 °C and display resolution of 0.1 °C, internal sensor (moisture) working on capacitive principle measures in the range of 10 to 95 % RH, accuracy of ±2 % RH and display resolution of 0.5 % RH and external electrodes measuring wood and building moisture works on principle of resistance measuring method, measure in the range of 15 to 100 digits and accuracy of ± 3 digits.