Mechanical Seals Standard
Description
Designing pumps, compressors and other equipment, the aim is to prevent leakage into that can emerge at any point by liquids or gases. To solve this problem very often are used mechanical seals. To obtain the desired sealing function and an adequate lifetime of the mechanical seal,the preconditions must be fulfilled within the permitted tolerances at any time: parallelism of the sealing surfaces perpendicularity of the seal faces to the rotation axis elastic contact of the sealing surfaces existence of a lubricating film between the two sealing surfaces Usually the sealing capability of the mechanical seal against shaft or housing is obtained with the secondary seals, as O-rings, bellows or boots In conjunction with the International Organization for Standardization (ISO) and their standards (ISO 3069), the German Industrial Standard (DIN) published proposals for standard mechanical seals with DIN EN 12756 (24960).
Similar products from BILLI DICHTUNGSTECHNIK GMBH
BILLI DICHTUNGSTECHNIK GMBH
Germany
Our mechanical seals for compressors are suitable for use in: Bitzer®, Bock®, Carrier®, Carlyle®, Carrier-Sutrack®, Copeland®, Dunham Bush®, Frick®, Gram®, Grasso®, APV Halls®, Howden®, Lightfoot®, Sabroe®, Stal®, Thermo-King®, Witt®, Zanotti® etc.
BILLI DICHTUNGSTECHNIK GMBH
Germany
Our mechanical seals for the shipping industry are suitable for use in: Allweiler®, Bornemann®, IMO®, Kral®, KSB®, Netzsch®, Seepex®, Thune Eureka®, Behrens®, Garbarino®, Grundfos®, Gulnard®, Hamworthy®, Heishin®, Herborner®, Iron®, JMW®, Jugoturbina®, Kikai®, Leistritz®, Merser®, Naniwa®, PCM®, Rickmeier®, Samson®, Scanpump®, Shinko®, SIHI®, Speck®, Sta-Rite®, Svanehoj®, Taiko®, Teikoku®, Worthington® etc.
BILLI DICHTUNGSTECHNIK GMBH
Germany
Mechanical seals for the food industry are used in a very broad range of industry sectors, such as in breweries, wine and cider productions, beverage industry, cheese dairies, creameries, juice productions, producers of "soft drinks", etc. In this case, the various components of the seal are made of FDA approved materials. Our mechanical seals are suitable for use in: KSB ®, A.P.V. ®, Alfa Laval ®, FRISTAM ® Lowara ®, TUCHENHAGEN ®, HILGE ®, INOXPA PROLAC ®, INDAG ®, GRUNDFOS ®, JABSCO ®, JOHNSON ®, etc.
BILLI DICHTUNGSTECHNIK GMBH
Germany
O - ring seal as flexible perfection To determine which O - ring can be used , only a few important operating parameters must be defined . The temperature , the pressure and the indication of the chemical resistance determines the selection of the correct O - ring at the right application. O - rings from Billi - seals are distinguished , depending on the material , by high thermal stability, good chemical resistance and good low temperature flexibility.