Meter Run
Description
Complete and flexible measuring element to facilitate on-site installationMounting of the primary element between flanges: ISO PN 2.5 to PN 420, ASME 150 # to 2500 #, others on consultation. Solder (BW) or flanged connection Material: Standard: carbon steel, stainless steel, others according to your application.THE FLOWMETER INCLUDES: the desired orifice (orifice plate, nozzle) the flanges to fix the orifice upstream and downstream straight lengths in accordance with the chosen standard ASSEMBLY AND ASSEMBLY DATA: The design, manufacture and assembly are carried out in our workshops in compliance with the standards (upstream and downstream pipe roughness, centering of the primary element, circularity of the piping, upstream and downstream straight lengths) in order to achieve optimal measurement accuracy. CHARACTERISTICS : orifice plate - see corresponding technical data sheet nozzle - see corresponding technical data sheet upstream, downtrseam straight lengths
- Yardsticks, metersticks, tape measures and rulers
- Flexible Measuring
- Measuring Element
Product characteristics
- Standards
- ISO 5167-1 & 2, ASME MFC-3M or ISO / TR 15377
- Fluid
- liquid, gas, steam
- Repeatability of the measure
- 0.1%
Documents
Similar products from DELTAFLUID
DELTAFLUID
France
Complete measuring element with special flanges - Suitable for pipe diameters ≤ 40 mmInstallation of the integrated sharp-edge orifice plate: between special flanges (direct mounting of the manifold and the differential pressure transmitter) Solder (BW) or flanged connection Material: Standard: carbon steel, stainless steel, others according to your application.
DELTAFLUID
France
the desired orifice (orifice plate, nozzle) the flanges to fix the orifice the pressure taps (at the flange or in the corners, depending on the primary element chosen) and the impulse tubes integrated or remote 3 or 5 way manifold the preset differential pressure transmitter the built-in temperature sensor (for temperature compensation) in option MOUNTING AND ASSEMBLY DATA: Optimized centering of the measuring element Honing of upstream and downstream pipes to meet roughness criteria Temperature and pressure compensation for gases to achieve very accurate flow measurement Remote mounting of the instrumentation according to the applications CHARACTERISTICS : For orifice plates: see corresponding technical data sheet For nozzles: see corresponding technical data sheet Straight lengths upstream, downstream, roughness and circularity of the tubes, centering measuring element: see details on the FAQ tab on this page ACCESSORIES : Temperature sensor: Sensor mounted on downstream
DELTAFLUID
France
The resistance probe offers a measurement of great accuracy and very good long-term stability. A Pt 100 Ohm probe corresponds to a platinum resistance whose initial value is 100 Ohms for a temperature of 0°C. The measuring element consists of wound platinum wires whose resistance varies according to the temperature. The resistance / temperature correspondence is documented in the IEC 60751 standard. The temperature probe is often delivered with a connection head (see photo opposite).
DELTAFLUID
France
Actor in the field of instrumentation, Deltafluid offers measurement products in pyrometry. Our range includes thermometers to obtain direct indications of temperature but also temperature sensors (resistance probe, thermocouple, multi-point probe, pyrometer assembly ...) which can be coupled with transmitters.