Miniature centrifugal pump - BMK

Cutter Pumps The cutter pumps of the series SFC are capable of cutting aluminium chips and similar materials and pumping of these materials along with the coolant fluid. An agitator located at the pump suction helps to break up and separate any large bundles of chips or birds nests which reach the pump suction. The specially made cutting unit (>60HRC) is cuting chips and the above located semi-open impeller allows with its large clearances to pump the particles along with the coolant fluid from the machine back to the filter. The SFC pumps are capable of handling chip to coolant ratios of up to 1.5% by weight. The SFC pumps are equipped with the user-friendly 45 degree flange connection which allows for either vertical or horizontal pipe connection and the connection of a pressure gauge with G 1/4. Volumetric delivery: up to 1700 l/min Delivery head: up to 45 m Please contact us for delivery quantity.

Miniature Centrifugal Pumps series KC are suitable for pumping thin-bodied fluids. They operate according to the bypass duct principle, with self-priming function following initial priming. Impellers: open / peripheral Fluids: industrial water, coolants, fuel oil Volumetric delivery: up to 45 l/min Delivery head: up to 45 m Please contact us for delivery quantity

Miniature Centrifugal Pumps Series B401 ...501 are suitable for pumping clean fluids up to 140° C temperature and 5 bar system-pressure. For open circuits see immersion pumps TS12...24. The minimum liquid level for immersion pumps of the B-series installed vertically must reach the lower impeller. Impellers: peripheral Types of fluid: Industry water Volumetric delivery: up to 40 l/min Delivery head: up to 60 m Please contact us for delivery quantity

Immersion Pumps are plain centrifugal pumps with the impeller fitted on the driving shaft extension. They are mounted on top of the container, the pump extension being immersed in the coolant. The maximum coolant level must stay a few mm/inches below the mounting flange. The STA serie offers a (SAE) flange with pressure gauge connection port. The flange can be rotated for either horizontal or vertical pipe connections. Volumetric delivery: up to 5000 l/min Delivery head: up to 120 m Please contact us for delivery quantity