OKS 300 – MoS₂ Mineral Oil Concentrate
Description
Lubricating oil additive for heavily loaded friction and rolling bearings for increasing the lubricating effect, improving the high-pressure properties and reducing the temperature increase Gear oil additive to guard against gearwheel damage Stops pitting and is especially suitable for gearbox designs with a high percentage of sliding Engine and compressor oil additive for reduced wear and increased operating safety, as run-in and smoothing lubricant Machining oil additive for chip-free or cutting production to increase working speeds and tool life Advantages and benefits Excellently suited as performance-increasing additive, as additive to bed track oils, engine oils, C/CC oils and slightly alloyed industrial oils Highly effective due to finest, homogeneous MoS₂ distribution in the oil Broad range of uses with many different oils and alone as a high-performance oil Lowest friction due to high lubricating effectiveness of MoS2 Fully stabilised without precipitation
- Silicones
- Oks Mineral
- Concentrate Oks
Product characteristics
- Density (20 °C)
- 0.92 g/ml
- Viscosity (40 °C)
- approx. 90 mm²/s
Documents
Similar products from OKS SPEZIALSCHMIERSTOFFE GMBH
OKS SPEZIALSCHMIERSTOFFE GMBH
Germany
Coating of threads with galvanized surfaces, e.g. screws for flakeboards to achieve controlled friction values Prevents cold-fretting Advantages and benefits Economical through low consumption (can be diluted with tap water) The coating can be checked easily through a fluorescent ingredient Tools and containers can be cleaned with water Does not contain any toxic components and is therefore sanitary harmless The water-soluble ingredients are biodegradable, the water-nonsoluble ingredients are ecologically neutral Forms a colorless, adhesive and tack-free sliding film after drying. With an inhibitor, which prevents from corrosion during the drying
OKS SPEZIALSCHMIERSTOFFE GMBH
Germany
Protection of surfaces of all kinds and welding nozzles for oxyacetylene gas and inert-gas arc welding Prevents baking on of weld spatters on surface and welding nozzle Advantages and benefits Later painting over, metallising and printing following prior cleaning easily possible Environmentally friendly, non-combustible Silicone-free Can be removed residue-free OKS 1600 is also suitable for use with the refillable Airspray system Also available as spray version OKS 1601
OKS SPEZIALSCHMIERSTOFFE GMBH
Germany
Coating of threads with galvanized surfaces and high-alloy steel threads to achieve controlled friction values Prevents cold-fretting Advantages and benefits Economical through low consumption (can be diluted with tap water) The coating can be checked easily through a fluorescent ingredient Tools and containers can be cleaned with water Does not contain any toxic components and is therefore sanitary harmless The water-soluble ingredients are biodegradable, the water-nonsoluble ingredients are ecologically neutral With an inhibitor, which prevents from corrosion during the drying
OKS SPEZIALSCHMIERSTOFFE GMBH
Germany
Protection of surfaces of all kinds and welding nozzles for oxyacetylene gas and inert-gas arc welding Prevents baking on of weld spatters on surface and welding nozzle Advantages and benefits Later painting over, metallising and printing following prior cleaning easily possible Environmentally friendly, non-combustible Silicone-free Can be removed residue-free