OKS 3520 – Extreme-Temperature Oil light-coloured synthetic

Grease lubrication of plain and rolling bearings in high-temperature range, where a mineral oil based grease cannot be used, e.g. on hot-air blowers and fans, autoclaves, drying ovens or systems in steelworks and foundries Advantages and benefits Drip-free hot bearing grease for a broad temperature range with high oxidations stability and moisture resistance Excellently suited for long-term lubrication of grease lubricating points subject to high-temperature loading Highly effective due to optimum high-performance formula Broad range of uses outside normal grease performance areas

Lubrication of chains, hinges, joints, clamping and drying frames or slideways at higher temperatures Suitable for conveying systems in painting, stoving, drying and cooling bed installations Advantages and benefits Highly effective due to optimum wear protection and outstanding oxidation properties Resistant to water and steam Good creep properties Very good adhesion and lubrication effect with no tendency to drip

Lubrication of chains, hinges, joints, clamping and drying frames, and slideways at higher temperatures For conveying systems in painting, stoving, drying and cooling bed installations Advantages and benefits Non-contaminating liquid lubricant for higher temperatures Highly effective due to optimum wear protection, outstanding oxidation behaviour and good creep properties Absolutely resistant to water and steam, inert with respect to acidic media Outstanding adhesion and lubrication effect with no tendency to drip and no formation of hard residues For best results clean the cold surface, first mechanically and then with OKS 2610/OKS 2611 Universal Cleaner. Apply sufficient amount onto the lubrication areas with brush, dip oiler, dipping or suitable automatic lubrication systems. Let excess drip off and let product affect before the beginning of operation. Instructions of the machine manufacturer have to be considered. Relubrication period and amount should be stated

Lubrication of chains, fringe bearings, hinges, joints, clamping and drying frames or slideways at higher temperatures and loads For conveying systems under radiation heat in painting, stoving and drying systems Advantages and benefits Highly effective due to finest, homogeneous MoS₂ distribution in the oil Emergency running properties through MoS₂ at dry running Outstanding adhesion and lubrication effect with no tendency to drip or dry out Silicone-free For best adhesion, clean the surfaces. Best way is to clean mechanically first and then with OKS 2610 or OKS 2611 universal cleaner. With a brush, drip oiler or by immersion or using a suitable automatic lubrication system, apply a sufficient quantity to the locations to be lubricated. Allow excess to drip off. Allow OKS 350 to soak in before operating. Observe the machine manufacturer's instructions. Assess the lubrication frequency and quantity on basis of service conditions