PAPRESA

INTOIDRO ELS: Bi-component cementitious elastic membrane based on cementitious binders and special elastic polymers, anti aggressive and abrasion resistant for mineral waterproofings. INTOIDRO MONO: Cementitious elastic fibre-reinforced mono-component mortar based on cementitious binders and special acrylic polymers highly elastic, antiaggressive and resistant to abrasion for mineral waterproofings.

Pre-mixed screed, 3 mm grit, damp earth type, fibre-reinforced with stainless amorphous metallic fibres, with high thermal conductivity, based on hydraulic binders, compensated shrinkage with rapid drying and controlled curing, ideal for Realization by hand or machine, also pressure pump, of background screed to be applied directly on any internal surface as long as it is stable and not subject to capillary ascent. Package: Bulk in silo-25 kg sacks-70 sacks-17.50 QL footboards RH Drying < 2%: 4 days Usage: Internal Color: Grey Particle size: ≤ 3 mm Yield: 18/20 kg/mq per cm thickness depending on the degree of comping Thermal conductivity EN 13813: λ = 2.03 W/MK Minimum application thickness Anchored screed cm 3 Float Screed cm 4 Screed on floor heating cm 3 above the ashlar Float screed on insulating mats > 6 mm cm 5 Compression resistance at 28 days EN 23892-2: ≥ 20 N/mm ² (C20)

Durus S500 is proving increasingly popular with designers, contractors and project owners. This synthetic macro-fibre has shown to be a valid alternative to conventional steel fibre reinforcement. With no need to change existing designs, a concrete mix using steel fibres can be replaced by a mix containing Durus S500 macro fibres. The workability will remain unchanged and often even be improved. Typical applications include the production of concrete tunnel segments and other precast concrete elements. The use of Durus S500 instead of steel fibres eliminates any risk of injuries to manufacturing operatives during dosing, de-moulding and handling of precast elements. Compliance with health & safety requirements during the production process and on the construction site are thus greatly improved.

Our thermally insulated halls are the highest quality solution and offer the best protection for sensitive goods. Thanks to all-round high insulation by means of sandwich elements, these lightweight halls can be used in all areas. The areas of application of our thermally insulated halls: - Storage for sensitive goods - protected parking and storage space - Assembly and commissioning for goods of all kinds - Maintenance and repair - Production and workshop - Sales and exhibition areas Benefit from the excellent heat-insulating and low-maintenance properties of full cladding made of sandwich elements. They consist of two outer shells made of steel and a foam core made of polyurethane or mineral wool, thus ensuring optimum insulation. This means that the energy required to heat the industrial hall can be significantly reduced. As a positive side effect, appropriate noise protection is generated at the same time.