PHSC CHEMICALS SP. Z O.O. - Anti-graffiti coating

Through scientific research supported by numerous tests, we have developed a high-tech anti-graffiti paint marked KTX 07. Principal characteristics and qualities of KTX 07 coating: • a durable synthetic system allows repetitive removal of graffiti (up to 100 cycles); • single-component preparation – does not require component mixing, does not generate losses caused by the curing of coating that was not used in a specific time – easy application; • creates a transparent coating which facilitates graffiti removal; • quick-drying, hardened by the air humidity; • vapour permeable; • removal of graffiti using only normal water or antigraffiti removers; • anti-adhesive, creates an anti-poster effect – poster tapes and adhesives are more difficult to stick to the protected surface; • UV-resistant, does not turn yellow; • 20-year durability; • high chemical resistance; • very good application parameters: from -5 to +30°C; • finishing variants: matt, gloss, RAL colour;

Principal characteristics and qualities of KTX 30 coating: • a durable isomorphic system allows repetitive removal of graffiti; • single-component preparation – does not require component mixing, does not generate losses caused by the curing of coating that was not used in a specific time – easy application; • creates a thin (approx. 2 - 5 μm), transparent layer of anti-graffiti coating that is easy to wash out; • 1 coating layer ensures full protection; • quick drying – the coating becomes dry in 15 minutes; • exceptionally high efficiency – up to 111 m²/L; • vapour permeable; • graffiti removal with chemical removers; • anti-adhesive, facilitates tape and poster removal; • UV-resistant, does not turn yellow; minimum 10-year durability; • chemical resistance; • anti-static properties; • finishing variants: • matt or gloss; • renews damaged, fogged or oxidised surfaces and restores their natural gloss;

KTX 05 is a one-component and water-based product which is colorless after drying and is used for protecting surfaces against graffiti. The coated surface is protected against aerosol spray paints, water-based markers, atmospheric pollution, dirt, acid rain and moisture. After application, KTX 05 accumulates on capillaries and pores’ walls as a separating layer, which prevents penetration into the substrate and reduces adhesiveness of paints/pigments. The coating is performed using two layers. KTX 05 is a hydrophobic preparation, has preservative properties as well as UV filters, thanks to which the colour of the protected surface remains unchanged. It reduces mineral substrates’ permeability to water and harmful substances. The substrate colour tone becomes slightly deeper, while the gloss increases a little with the surface texture remains unaffected. Available in a semi-matte version. KTX 05 has been awarded Technical Approval of IBDiM: No. AT/2016-02-3286.

KTX 05 strong is a single-component,  water-based product containing microcrystalline- wax. It is colourless after drying and is used for protecting surfaces against graffiti. The coated surface is protected against aerosol spray paints, water-based markers, atmospheric pollution, dirt, acid rain and moisture. On application, KTX 05 strong accumulates on capillaries  and pores' walls as a separating layer, which makes the surface impermeable  to water and reduces adhesiveness  of paints/pigments. It is applicable in 1 layer. KTX 05 strong is a hydrophobic preparation, has preservative properties as well as UV filters, thanks to which the colour of the protected surface remains unchanged. It reduces mineral substrates’ permeability to water and harmful substances. The substrate colour tone becomes slightly deeper, while the gloss decreases a little with the surface texture remaining unaffected. Availabe in a semi-matte version.