Italy
Service Provider
Italy
The bending of aluminum profiles used in curtain wall systems is carried out with a patented system by filling with a special alloy. During this process, the cross section is not only calendered with millimetric precision, but it also meets all the perpendicular tolerances, avoiding any kind of deformity deflection or "twisted effect", thus maintaining the perfect geometry required.
Request for a quoteItaly
The curve of the aluminum profile used for mobile walls is made with a sophisticated soft curving of the profile, which makes the curve with straight ends to the two sides of the extrusion. The service is performed by means of laser pointing installed on the bending machines.
Request for a quoteItaly
Together with the curving of single or double sunshade systems, Punto Curvatura is capable to twist them to meet the different architectural requirements.
Request for a quoteItaly
Punto Curvatura is capable, with special cylinders installed on the bending machines, to comply with the most complex curvature requirements for the realization of tensile structures used to cover circuses, military hangars, museums, exhibition stands, gazebos, stages and agricultural structures.
Request for a quoteItaly
Handling systems often require high-precision curves to follow a well-defined handling pattern. Punto Curvatura can bend all major monorail or two-rail transport lines in packaging equipment, sorting systems, airport baggage conveyor belts, production lines, bottling plants, food handling plants, treadmills and automated transportation.
Request for a quoteItaly
For the installation on roofs and warehouses, Punto Curvatura realizes the curvature of the substructures of aluminium profiles used for photovoltaic systems.
Request for a quoteItaly
The demand of aluminium profiles to furnish the HoReCa industry as well as Department Stores with particular sizes and shapes has considerably increased over the last years. The calendering of profiles used in the construction or in the realization of the most modern refrigerated showcases for cafés, ice-cream parlours or restaurants requires special attention for the aesthetics of the profile.
Request for a quoteItaly
The twisting or torsion of the extruded aluminium, stainless steel, brass or iron profiles is carried out via a clockwise (or counter clockwise) solicitation of the cross section against its axis. In order to avoid that this twisting jeopardizes the stiffening rib, we use a filling system to help the stretching and the compression of the fibres. We are able to twist up to 9 mt profiles!
Request for a quoteItaly
The process of three-dimensional curving of aluminium, stainless steel, brass or iron profiles is carried out in two steps: torsion and bending. This is a very complex process, which only a high-skilled staff, with a technological equipment, can carry out.
Request for a quoteItaly
Punto Curvatura adopts a technological solution to bend those profiles that have already been through the powder coating treatment, particularly wooden-paint sublimates.
Request for a quoteService Provider
Via Europa Unita, 5
Acquafredda
25010 Brescia - Italy
Bulgaria
Metal In Ltd have two punching machines – TRUMPH and Raskin and two CNC bending machines TRUMPH. This allow us to produce punching details with maximum sizes 1250x2500 mm and maximum thickness 4 mm. Machines are with maximum length 3000 mm and power 120 tones. We also have eccentric presss machines with maximum power of kick 160 tones and hydraulic presses with maximum power 100 tones. We have our own production of punching and bending instruments. The company have three roller bending machines for sheet iron, profiles and tubes. Except upper mentioned operations we also make MIG-MAG and WIG welding, cleaning and powder coating.
Request for a quoteBulgaria
Bending machines, which we have allows us precise working of tube with maximal outer diameter ф50 mm and thickness of the wall 3 mm. As well we can bend tubes and profiles with big radiuses and big length – 6 m. With our available equipment we produce welded constructions with length till 6 m and weight till 3 tones. This give us a possibility to produce complex products of bended tubes and profiles with excellent quality. The company produce: Constructions, in which is mounted production equipment. Stands for bicycle parking Pumps for pumping out water by hand from big depth Tube knots and details for machines and equipment Tube details for gas device Shelfs Hangers metal fence Shed for reserve players Shed for bicycle parking Metal Cabinets Metal Boxes
Request for a quotePortugal
Profiles produced "C' Section characterized as CCTR 260. Discover our catalog here
Request for a quoteTurkey
CUTTING CAPACITY 300 mm Mild Steel 50 mm Stainless Steel 50 mm Aluminum plasma cutting We provide high-quality results in cutting various thicknesses of mild steel, stainless steel, and aluminum materials. We also provide beveling up to 45 degrees and marking.
Request for a quoteCreate one request and get multiple quotes form verified suppliers.