Static Torque Transducer TT-QC

The gateway to the finest in torque measurement tools! TT-Series Torque Transducers are designed to work with Sturtevant Richmont Digital Torque Testers or the like. Features: - Integrated SR mounting flange - Can be mounted to ML 250 Mechanical Loader. - Can be Mounted to Quad Plate for multiple mounting on ML 250. - Smaller sizes (up to 400 in.oz.) can be mounted to SSMB, STMB, or UMB brackets. - Larger sizes (500 ft. lbs. and above) can be mounted on UMB L-bracket. Related Products: - Mechanical Loader ML - DTT System 8 Optional Components: - 10293 = Detachable Signal Cable ca. 1,20 m * - 10153 = Single Mounting L-Bracket UMB (500 ft.lb and above) - 10154 = Triple Mounting L-Bracket STMB (up tp 400 in.oz) - 10601 = Switchbox 4-Way - 870776 = Square Adapter 1/4"f x 3/8"m - 870777 = Square Adapter 3/8"f x 1/2"m - 870778 = Square Adapter 1/2"f x 3/4"m - 870779 = Square Adapter 3/4"f x 1/1"m

The most accurate digital torque tester with Fail Safe Engineering! - Greater accuracy and durability with simplicity and ease of operation - Floating decimal point, 6 digit display is easy to read - Accurate to ± 0.25% (indicated value) from 10% to 100% - Over capacity alert and tracking System 8 error proofs your error-proofing program by letting you know when the unit has been stretched to 120% or more of capacity and may no longer be in calibration. System 8 has an LED that flashes red to alert you to the problem. It doesn’t stop until you reset the unit. The display also tells you the unit has been stretched over capacity. System 8 captures the over capacity data even if the memory was turned off. If memory was turned on and the unit is pulled over 120% capacity and a worker tries to erase the memory to stop the LED from flashing, the display tells the worker to “See Supervisor 120% Over Capacity”. No other torque tester on the market does this.

The gateway to the finest in torque measurement tools! Sturtevant Richmont TT-L Series Torque Transducers are designed to work with both System 4 / System 5 and System 8 Digital Torque Testers. These transducers incorporate an integral “L” bracket to facilitate horizontal or vertical mounting, such as for a bench or mobile (cart) application. Features and Benefits: - L-bracket has two (2) holes, 5/16” diameter, 3.25” on center on each leg of bracket. - Designed to be mounted to a bench or cart - very quickly. - Requires detachable cable (P/N 10293) for attachment to Switch Box or directly to tester. Related Products: - DTT System 8

Workbench mounted Torque Transducer Crane’s stationary transducers are the quality choice for the testing of all continuous drive, impulse and hand torque tools in the workshop and production line-side environment. For best results with impulse tools we recommend the use of a Crane CheckStar rotary torque transducer with a suitable joint kit rather than a stationary transducer. Stationary transducers are used off the production line in workshop or line-side test stations. Combined with joint kits that represent the production joint condition, the stationary transducers form an effective off line test for verification of assembly tool performance. Key Features: - Static accuracy ± 0.25% FSD (bi-directional) - Plug and Play with Crane display systems (UTA) - Combine with joint kits for workshop simulation of hard to soft joints - Built-in workbench mounting flange - Rugged and durable construction, aluminium housing, stainless steel shaft - Ingress protection rating IP40.