RC-SPC1K is an thick film technology rain sensor. This device is realized in Allumina (AL2O3) substrate, this material is endowed a big reliability from an electrical thermal point of view. The sensor consists of three parts : 1) Capacitive sensor (Face A) 2) Heater generator 3) Temperature Sensor The Face A is the sensitivity area (capacitiver sensor) this area is exposted to natural agent (rain); In dry condition the value of the capacitor is nominal 100pF, In presence of the rain the capacitance goes to high valued respect the dry contidion; The ratio changing is over 420%, in the table N.1 you can verify the capacitance change characteristics. On Face B is present the heating circuit the temperature sensor (NTC component) and the connection interface (six pads).
Germany
The NR 260 is a capacitive level sensor for monitoring liquids. It is designed for use in fuel cells. The material is also suited to applications in the chemical industry for monitoring aggressive media. The functions for MIN or MAX monitoring as well as other properties (output signal LSS or HSS, response delay etc.) are factory pre-set. The Main Features of the NR 260 are high medium resistance of materials enamel, Hastelloy C4 2.4610 and stainless steel 1.4571 high protection class IP67 with connector short-circuit proof switching output 1 A, high side or low side switch MAX sensor or MIN sensor switch point factory pre-set for the following media: de-ionised water (conductivity < 4,2 μS/cm): 28 mm ± 2 mm tap water (conductivity ≈ 300 μS/cm): 22 mm ± 2 mm other media upon request; switch point adjustment via programmable interface on request
Request for a quoteGermany
Capacitive sensors are designed for non-contact measurement of displacement, distance and position, as well as for thickness measurement. Due to their high signal stability and resolution, capacitive displacement sensors are applied in laboratories and industrial measurement tasks. In production control, for example, capacitive sensors measure film thickness and application of the adhesive. Installed in machines, they monitor displacement and tool positions.
Request for a quoteGermany
—Capacitive proximity switches for the detection of non-metallic and metallic objects —Smooth plastic sleeve —Diameter 20 mm, 34 mm —for counting, position queries of parts or products, for example in furnace technology, chemical industry or plastics processing — with additional PTFE sleeve suitable for level monitoring in tanks
Request for a quoteGermany
— AC and DC version sensors — Sensing distance / sensitivity adjustable with side potentiometer — Sturdy metal or plastic enclosures — Metal versions with Teflon front cap — Temperature range: -25°C up to +70°C — Sensing distances: 2 mm up to 13,5 mm — Cable / connector versions — 10 – 36 V DC or 20 – 250 V AC — PNP / NPN or AC versions — NO / NC versions — Short circuit-proof PNP versions — M18 with function/operating voltage indicator
Request for a quoteCreate one request and get multiple quotes form verified suppliers.