RIBOCONE is a multi-purpose equipment that can be used for mixing, drying, cooling, vacuum drying, filtration & (vacuum) drying and heating treatment (for decreasing of viable cells, for crystallization, for chemical reactions). Features Drive, gearbox and bearings are located outside of the vessel in order to prevent risk of product contamination due to lubricants, amongst others Its special design increases the circulation of the product inside the vessel resulting in a fast mixing and fast drying Uniform moisture content and temperature of the product due to total mixing of the product Complete discharge of the final product from the bottom of the cone due to no bearing Typical Applications Electronic and battery materials / Ceramics / Magnetic materials / Chinese herbal medicine / Seasoning / Animal feed / Resin powder/ APls, others
Germany
Lödige shovel dryers are batch vacuum dryers. The mixing elements are frequency-controlled for ideal adaptation to the process. Special rotating mixing elements, installed in a cylindrical drum equipped with a temperature control jacket, create a three-dimensional product movement . The resulting contact frequency of the particles with the heat exchange surface leads to incredibly short drying times. The intelligent product movement ensures intense contact of individual product particles with the heated container wall while also providing very gentle product treatment. The chopper rotating at high speeds is used to disperse the product during transition between phases. Product surfaces are opened up during this process. This leads to a significant increase in drying capacity and prevents moisture and temperature gradients. Fine particles pulled along by solvent vapours are separated in the filter and returned to the product bed through pneumatic filter cleaning.
Request for a quoteItaly
Main features • Management of the process time and temperature through the heat exchanger • Short mixing time • Extremely high mixing quality • Batches with repeatable results • Mixing ratio 1/100.000 • Coefficient of variation (CV): ≤ 3 % • Low maintenance Techanical features • Batch size: from 65 to 28.000 liters (net) • Cylindrical mixing chamber • MIxing tools: ploughshare / ploughshare with toothed design / Mix Paddle / Mix Paddle with toothed design • Material of costruction: carbon steel / Hardox 450 / AISI 304 / AISI 316 / AISI 316Ti • Inspection door complete with safety electric lock • Discharge door with round profile, building the bottom side of the mixing chamber • Rotor shaft with turned and coaxial ends • Rotor shaft sealing system with packing seals and wear resistant ferrules to protect the rotor shaft, prepared for flushing with air / nitrogen • Heat exchanger on mixing chamber for heating / cooling processes
Request for a quoteGermany
In addition to filtration, compressed-air drying contributes significantly to an increase in process reliability. Humidity in compressed-air systems causes corrosion, and promotes the growth of micro-organisms. In individual cases, condensate emerges at the point of use - an ongoing danger for the operational flow, for example because of failing pneumatic controls, increased wear and tear or because of other disturbances in the production process. With considerably enhanced process reliability, the DRYPOINT dryer technology offers decisive advantages for every field of application. The BEKO TECHNOLOGIES portfolio comprises application-optimised refrigeration, adsorption and membrane dryers for volumes up to 1,500 m³/h. This range of dryers is completed by heat-regenerated EVERDRY adsorption dryers which are designed for large volume flows up to 20,000 m³/h.
Request for a quoteUkraine
Each of us has faced the problem of drying towels in the kitchen, especially during the cold season. If the towels do not get dry quickly, they get an unpleasant odor and become dirty very quickly. The solution to this problem is an infrared towel dryer
Request for a quoteCreate one request and get multiple quotes form verified suppliers.