RV steel galvanised Sealed covers

LOAD CAPACITY: 125 kN test load EN 124. MATERIAL: Frame and cover sections in extruded aluminium. Stainless steel screws. FEATURES: Sealed access cover in high-quality finish. Very attractive surface, the visible edges are particularly attractive. Therefore these covers are particularly suitable where a look of elegance is required. Very easy-to-open design. Robust corner joints guarantee a very high degree of rigidity and make it easier to lay tiles and ceramic finishes. EPDM seal. The cover is reinforced with a clamped steel mesh reinforcement. THE LIFT-OFF OPENING SYSTEM: Every HAGODECK Type BVA alu cover comes with a set of lifting keys and precise installation instructions. The HAGO advantage: jammed covers are released by simply turning the Golden Key. APPLICATIONS: Inside buildings where it is important to obtain a nice visual effect. Also, in places where floor finishes may need polishing after fixing or where particular attention needs to be given to corrosion...

Load capacity: 15 kN test load EN 124. Material: Frame made of aluminium extruded sections. Cover made of 3/5 mm aluminium chequerplate. Aluminium reinforcement to the underside. Stainless steel screws. Features: Sealed cover. EPDM seal. Completely rust-proof. Light weight. Opening tool included. Applications: For pedestrian use inside buildings and their surroundings, particularly where corrosion-resistance and/or low weight are of great advantage. Installation: Installation must be carried out according to our instructions. With water-tight models, care must be taken to seal the outer frame into the surrounding flooring. Installation height ≈ 3.5 cm Total height including reinforcement of bottom ≈ 7 cm Special sizes possible *S = available from stock *O = to order

Load capacity: 125 kN test load EN 124. Material: Grade 304 stainless steel. Passivated after welding. Also available in grade 316 stainless steel on request (no stock item). Features: Accurately manufactured fully sealed access covers. Tapered design allows easy opening. Virtually invisible when installed. EPDM seal. The Lift-Off opening system: Every HAGODECK Type BVE stainless steel cover comes with a set of lifting keys and precise installation instructions. The HAGO advantage: jammed covers are released by simply turning the Golden Key. Applications: Inside buildings or their surroundings, where exceptionally high standards are needed or where the hygienic properties of stainless steel are preferred, e.g. in the food industry, in meat-processing areas, dairies, hospitals, swimming pools. For indoor swimming pools only use grade 316 material! Installation: Installation must be carried out according to our instructions. With water-tight models, care must be taken to seal...

Load capacity: 125 kN test load EN 124 Material: Frame and cover in 2 mm cold-formed precision steel profiles. Hot-dip galvanised. Features: Standard version (not sealed). Type B should only be used where the “sealed” characteristic is not required. Tapered design allows easy opening. Virtually invisible when installed. Robust steel mesh reinforcement, crosswise welded. Opening: Every HAGODECK Type B steel cover comes with a set of lifting keys and precise installation instructions. Applications: Inside buildings over sealed inspection fittings or installations where a fully sealed cover is not needed. Installation: Installation must be carried out according to our instructions.