Radial lead type aluminum electrolytic Capacitors - KU series

The MCP1702T-3302E/CB is a low quiescent current low dropout (LDO) voltage regulator in 3 pin SOT-23A package. This regulator is an ideal choice for two to six primary cell battery powered applications, 9V alkaline and one or two cell Li-Ion powered applications. Output voltage tolerance of MCP1702 is typically ±0.4% at +25°C and ±3% maximum over operating junction temperature range of -40°C to +125°C. Line regulation is ±0.1% typical at 25°C. When only 1F of output capacitance is used, the LDO output is steady. Electrolytic capacitors made of ceramic, tantalum, or aluminum can be utilized for input and output. Overcurrent and overtemperature protection provides a reliable solution for every application. Short circuit protection. Fixed output voltage is 3.3V

Specification of this Liron LKH snap in aluminum electrolytic capacitor with high operating temperature long lifetime high ripple current from china capacitor factory manufacturer Liron is a professional capacitor manufacturer focusing on snap-in, screw terminal, radial type aluminum electrolytic capacitors and film capacitors. Liron owns world-class production equipments which can offer 120,000,000 pcs production output per month for its distinguished clients worldwide. Liron superior capacitor can match low ESR, long lifetime, low resistance, low leak current, High working voltage and more different requirements. LKH series is a high operating temperature, long lifetime, high ripple current electrolytic capacitor that matches following SPEC. LKH snap in aluminum electrolytic capacitor can be used in switching power, frequency converter, air conditioning,for welder and PCB mounting etc. The operating temperature of LKH can be from -20℃ to +105℃The load life is 5000H guarantied.

Three-phase protection for TNC-S System High discharge capacity ,quick response,pluggable Multifunctional conneciton for conductors and busbars Green window will change to red when fault and also provide remote alarm control at the same time

Place of Origin: China Base Material: FR-4 Copper Thickness: 1/2OZ 1OZ 2OZ 3OZ Board Thickness: 0.8mm Min. Hole Size: 0.1mm Min. Line Width: 0.065mm Min. Line Spacing: 0.065mm Surface Finishing: HASL Application: Electronics Device Type: Customizable Solder mask: Black Material: FR4 CEM1 CEM3 height TG Color: Red Blue Green Black Testing Service: 100% Supply Ability: 25000 Square Meter/Square Meters per Month