SIRAX BT5400

Accurate, strong, easy to mount, and weatherproof, the transducers series PD and PE are the ideal solution when you need to measure thickness or control linear displacement on any kinf of industrial machine. High reading resolution (up to 0.005 mm) Easy mounting method High protection against environmental agents (IP65) Strokes: 60 ÷ 990 mm

Standard reference force transducers specially designed according to ISO 376 standard (classes 1, 0,5 and 00). o Wide range of capacities (up to 50 MN) o Complete range of load accessories

Linear displacements and mechanical values which can be converted to displacements (e.g. compressive and tensile force, strain, torque and vibration) may be measured by these DC/DC displacement sensors. The probe tip of these sensors is pushed onto the measuring object by a spring. This makes it possible to use these sensors were a mechanical modification of the measurement object (mounting hole) is not allowed or difficult. Output voltage as function of the displacement with the impedance as parameter. Sensors of series 87350 generally consist of an oscillator, a demodulator and a transformer with moveable core. They are energized by DC voltage. The oscillator uses this DC voltage to generate the carrier frequency, which is needed for the operation of the sensor. Dependent on the position of the core, which is made of ferromagnetic material, voltages are induced by the two secondary coils of the transformer.

9 transducers Remote control Adjustable volume Uses 6 AA batteries