SPEED SCREED LTD

Flowing screeds are designed to leave a smooth flat surface finish, in most cases flowing screeds allow foot traffic within 24 to 48 hours and can be forced dried after only 7 days, if necessary. Key facts about flowing screed Ideal for domestic projects with underfloor due to its very high thermal conductivity. Up to 2000m2 per day productivity Foot traffic within 24 to 48 hours Joints at 30-40 linear meters Very low shrinkage Minimal cracking Will not curl No reinforcement required Eco friendly calcium sulphate binder Can be forced dried after only 7 days We are approved installers for all the major UK suppliers (Aggregate Industries Highflow, Tarmac Topflow Screed A, Hope Hopeflow Gypscreed, Cemex Supaflo, & Breedon Aggregates Easyflow).

We can offer screeding solutions that will allow you to lay floor coverings (e.g. tiles, vinyl, carpets, etc.) after hours rather than days. Whatever your programme dictates, we have a screed solution to fit. So don’t let drying times hold up your programme, contact us today to discuss the options. Another bonus with fast drying screeds is that you can ‘traffic’ them quicker without having to wait for 7 days. You would have to wait for at least 7 days with a traditional screed before ‘trafficking’ it, as per BS8204. How fast you can ‘traffic’ depends on which screed solution you opt for but, once again, this can be as little as 24 hours. This can be extremely useful if time is tight in your programme. Fast drying screeds are used to reduce the drying time form months to days, which allows for early laying and installation of the chosen floor coverings. Key facts about Fast Drying Screed Allows for early foot trafficking No waiting months to lay floor coverings No need for liquid DPM on

K- Screed has been supplied in the market for over 30 years performing excellently over that time. Key facts about K-Screed: Early installation of moisture sensitive finishes Excellent workability properties, good compaction High strength and resistance to construction traffic Can be used with underfloor heating systems Guaranteed to meet Category A or B BRE screed test requirements as per BS8204 –1 Let Speed Screed provide you with a fantastic alternative that gives you better performance at a far less inexpensive price than K-Screed, laid by our expert installers. Mapei Mapescreed 704 is that product.

All the sand and cement screeds we install meets with the highest standards, whether it is factory produced or site batched. All our suppliers’ materials meet with the requirements of BS EN13813. Sand and cement screeds are suitable for all conventional screed applications, including monolithic, bonded and unbounded construction. Sand and cement screeds come with a number of options to help minimise surface cracking and to increase early strength characteristics. Key facts about Sand and Cement Screeds ? Ideal for most building projects domestic to commercial ? Surface Regularity from 3mm over 2m (SR1) ? Ideal for projects with underfloor heating ? Perfect when falls in the screed are required

Why not choose your under-floor heating system from Speed Screed? • We can offer a totally bespoke service • Fully designed to your exact requirements • Supply of al membranes, insulation, perimeter expansion strips and movement jointing • Our systems are manufactured by the best in the business • We provide a complete package including screed installation • Everything taken care of with no fuss and to your program with no delays. ? Why choose underfloor heating over radiators? Using one of our under floor heating systems has a host of benefits opposed to traditional heating methods such as radiators, comfort, reliability and reduced costs. Underfloor heating provides an ideal air temperature profile in your rooms through the correct balance of radiant and convicted heat. ? Heat Where You Need It Most heating systems heat from the top down, which can leave us feeling uncomfortable.

Speed Screed can provide the exact screeding solution for your underfloor heating system, which will ensure that thermal conductivity is maximised Our solutions cover a wide range of screeding products depending on your requirements. Key facts about Underfloor Heating Screed ? Flowing ? Fast Dry ? Rapid Strength ? Traditional ? Smoothing Let Speed Screed match a product to your exact requirements, all expertly laid. If you require your underfloor heating system designed and installed too, then we can offer a totally bespoke service.

Wslip membrane, gas membrane, damp proof membrane, radon barrier, liquid dpm e supply and install a number of systems using polythene membrane, slip membrane from 500 gauge to Damp Proof Membrane at 1200 gauge and above. The 500G membrane performs as a separating layer rather than keeping moisture out, whereas the 1200G (and above) membranes ensure that no moisture is made available to the screed and floor coverings. Liquid damp proof membrane are suitable for moist substrates where thin screeds or floor coverings are required and where program dictates a solution is required to lay the floor coverings. Radon barrier and gas membrane can also be installed to prevent Radon entering the building by airflow. Call us to discuss your requirements.

Insulation is becoming the element of the build that requires more thought than ever before. Which insulation systems are available? What strength, density, acoustic and thermal performance does the build require? Is there minimum requirement and what performance would be preferred? Have you considered Part E and Part L of the Building Regulations? We can design insulation systems that meet your target U Value.

Do you need noise control within your project? Let us supply and lay a system that will meet with Part E (Sound) of the Building Regulations. If your project expects to either use Pre-completion Testing, or Robust Detail, we can supply and lay the system to your requirements. Our installers are fully trained and approved by Monarfloor Acoustics for their Tranquilt system. We even took part in the testing at Napier University when the product was undergoing testing to achieve its Robust Detail status. A system that is not suitable will fail, and certainly a system that is not installed correctly will fail!. Once the screed is laid there may be no visible sign of inadequacy but sound testing leaves no doubt as to the adequacy of the system. Avoid a failing system by using us to supply and lay your screed system. •Airborne sound •Impact sound •Flanking sound

Floor levelling compounds are generally used to level a substrate so it is necessary to bond them directly to the substrate. The floor levelling compounds then leaves the surface suitable for all floor coverings, especially thin floor coverings like vinyl. Thin floor coverings require a smooth/flat surface to be applied to so that they look their best. If the floor’s surface is not smooth, when thin floor coverings are applied, it will show the floor surface’s irregularities. Cementitious Compounds With depths ranging from 3mm up to 50mm, these products are very versatile. They tend to be flowing screeds to ensure that the product self smoothes, thus providing a surface suitable for floor coverings. The finishes range from epoxy paints and resins, wood flooring, vinyl’s and ceramic tiles.