Double row spherical roller bearings have two rows of self-aligning rollers and common spherical raceways on the outer ring. The internal construction of the bearing enables the mirrored misalignment of the rings. Spherical roller bearings can tolerate high radial loads whilst at the same time transmitting axial forces in both directions.
Germany
With decades of experience, we manufacture spherical roller bearings at KIS that can support large radial and axial forces in both directions. The perfect solution for applications that have to withstand massive loads. Due to the design of two rows of pendulum-shaped rollers in a common, hollow-ball raceway in the outer ring, our spherical roller bearings can support large radial and also axial forces. This makes them perfect for applications that have to withstand high loads and shocks and compensate for shaft bending or misalignment. In addition to conventional spherical roller bearings (which have no seal and have either a tapered or cylindrical bore), there are also application-specific variants developed for special requirements (e.g. sealed spherical roller bearings or bearings with optimised load ratings). Spherical roller bearings offer high performance and efficiency and are available in a wide range of sizes and designs.
Request for a quoteNetherlands
IKO PILLOBALLs are compact selfaligning spherical bushings which can support a large radial load and a bidirectional axial load at the same time. These bearings are available in insert type, diecast type and lubricationfree type depending on the type of sliding surface. In the insert type, a spherical inner ring makes contact with a special copper alloy bushing with superior runin properties. In the diecast type, a spherical inner ring makes direct contact with the bore surface of the body of special zinc diecast alloy. In the maintenancefree type, a spherical inner ring makes contact with a special selflubricating PTFE liner. Thus, a smooth rotational and oscillatory motion can be achieved with superior antiwear and load properties in each type. PILLOBALL Rod Ends have either a female thread in the body or a male thread on the body, so they can be easily assembled onto machines. They are used in control and link mechanisms in machine tools, textile machines
Request for a quoteNetherlands
IKO Spherical Bushings are compact selfaligning spherical bushings with inner and outer rings in contact with the sphere, which can support a large radial load and a bidirectional axial load at the same time. There are many models of Spherical Bushings, but they are basically divided into steelonsteel types and maintenancefree types according to the kind of sliding surfaces. Steelonsteel Spherical Bushings have inner and outer rings of highcarbon chromium bearing steel, of which sliding surfaces are phosphatetreated and then drycoated with molybdenum disulfide (MoS2). They can, therefore, operate with low torque, and have excellent wear resistance and large load capacity. They are especially suitable for applications where there are alternate loads and shock loads. They have wide applications mainly in industrial and construction machinery. Maintenancefree Spherical Bushings consist of an outer ring which has a special PTFE liner reinforced
Request for a quoteGermany
Impact rollers are available with rubber or polyurethane discs FRAS discs are available for explosive environments Dimensions: Roller diameter 63,5 mm (2-1/2” to 10”) Shaft diameter up to 80 mm (3-1/8”) Ball and spherical roller bearings
Request for a quoteCreate one request and get multiple quotes form verified suppliers.