STL SYSTEMS AG

Stationary ship will be treated and ranged by magnetic deperming range in a cage System for the demagnetization of naval ships and subsequent magnetic surveying on a magnetic demagnetization and surveying equipment installed within a cage type frame, with the special feature that the ship is stationary during the entire treatment process similar to the earth magnetic simulator of German Navy. Treatment and magnetic measurement of Navy vessels in combination with time optimzed and area economy lead to a range that combines the advantages of ODMR and HDMR, where all system entities are installed on a frame around the vessel undergoing ranging and treating. Above sketch shwos the ODMR combining simulation and deperming coil system integrated on a cage type building, which can be installed on any harbour or Navy area. Pricing may vary depending on cable length, available power supply and required magnetic field.

One single MiniFEB (Front End Board) allows the operation of 3 sensors parallel. The MiniFEB has an TCP/IP output protocol and can be used for many channel systems by combining with a switch. A backplane can be used for power supply and synchronisation of all MiniFEB boards. Pricing may vary depending on requested cable length and available power source.

The MD900 is an inductive metal detector for use in garbage sorting. It consists of a high-frequency field generator and a series of probes running transversely to the treadmill, which analyzes the product stream in a location-specific and location-resolved manner. The data for the opening and closing of the valves, which are transmitted in real time via an SPI interface to the valve control in the blowout unit, are calculated. Operation is via an Ethernet interface. All data for configuration during operation (operating mode, sorting program and other parameters) are transmitted via the Modbus / UDP protocol. For updates and error analysis, an independent TCP/IP interface is available. The sensor is connected via 2 connection cables to the blow-out unit.

STL offers the earth magnetic field simulator (EMFS) which can be used for worldwide simulation of the earth magnetic field. Earth Magnetic Field Simulators (EMFS) are typically being installed in a bay area or river estuary as well as artificial harbours. The EMFS System is used for calibration of the onboard degaussing system (OBDS) and Navy vessel's preparation for any operation missions and the dedicated simulation of the magnetic field in the area of mission. Quantity and type of used sensors, sensor array, software and coil system including power sources are always designed in respect of the specific requirements of the customer. STL can supply: - Complete sensor array - Data acquisition system - Control and evaluation software - coil cables and power sources Pricing may vary depending on the requested cable length, available power supply and required magnetic field.