STRECKFUSS SYSTEMS GMBH & CO. KG - Innovative Lötanlagen

TYP C 055/H Universal cutter for radial components Description The Streckfuss Devices Type C 055 H is designed to cut the leads of axial or radial leaded components incl. IC's to the required length. Cover plate and cutting tip are drilled with each other, so all leads will be cutted simultaneously. The plates are made of high- quality tool steel hardened to 60 HRC and polished. Components

TYP C 055/P Universal cutter for radial components Description The Streckfuss Devices Type C 055 P is designed to cut the leads of axial or radial leaded components incl. IC's to the required length. Cover plate and cutting tip are drilled with each other, so all leads will be cutted simultaneously. The plates are made of high- quality tool steel hardened to 60 HRC and polished. Components

TYP C 057 Universal cutter for radial components Description The Streckfuss device Type C 057 is designed to cut the leads of axial and radial components incl. ICs to the required length. Even female connectors can be processed with this device. A diagonal arranged cutting knife is be driven over the whole working surface, so each component terminal is cutted by itself. The plates are made of high quality tooling- steel, hardened to 60 HRC and polished. Components

TYP C 066/HA Cutter for radial taped components Description With the Streckfuss device Type C 066 HA, all taped radial components, which meet the IEC- specification, can be cutted to the desired length. The integrated touch- facility for components eliminates any kind of belt tolerances. Components

TYP C 066/MA Cutter for radial taped components Description With the Streckfuss device Type C 066 MA, all taped radial components, which meet the IEC- specification, can be cutted to the desired length. The integrated touch- facility for components eliminates any kind of belt tolerances. Components

TYP C 066/MAZ Cutter for radial taped components Description With the Streckfuss device Type C 066 MAZ, all taped radial components, which meet the IEC- specification, can be cutted to the desired length. The integrated touch- facility for components eliminates any kind of belt- tolerances. Components

TYP C 034/Mil Cutting, stamping and bending device for axial components Description To facilitate the placement of short axial leaded components that must be cut before insertion into the circuit board to the appropriate length and bent to the required height. In the device can be adjusted via adjustment screws C 034/Mil both cutting length and height and the components are then processed. The setting is displayed on the relevant scale of the device. The component is manually inserted between the tools. Those are actuated by a pneumatic foot switch. The changeover for different cutting and grid dimensions happens in less than a minute. Components

TYP C 034/S Cutting, stamping and bending device for axial components Description To facilitate the placement of short axial leaded components that must be cut before insertion into the circuit board to the appropriate length and bent to the required height. In the device C 034/S can be set via adjustment screws both cutting length and height and the components are then processed. The setting is displayed on the relevant scale of the device. The component is manually inserted between the tools. Those are actuated by a pneumatic foot switch. The changeover for different cutting and grid dimensions happens in less than a minute. Components

TYP C 042 Cutting, stamping and bending device for axial components Description The Streckfuss Device Type C 042 is designed to cut, stamp and bend the leads of axial components. By the use of interchangeable tool sets a variety of form configurations can be achieved with this device. The change can be done easy and secured in less than two minutes. The settings will be displayed on the scale of the device. The embossing for the leads are tooling- specific. This tools are produced to meet customer requirements. The components are hand fed into the tooling. The component body has to be centered between the bending anvils. After the Foot pedal is depressed, the component leads are clamped on both sides. The leads are then cut to length and depending on the form shape the required lead features are put in the leads at this time. After that, the leads are bend to the 90° configuration. The processed component is then rejected by the front of the device. Components

TYP C 042/S Cutting, stamping and bending device for axial components Description The Streckfuss Device Type C 042 is designed to cut, stamp and bend the leads of axial components. By the use of interchangeable tool sets a variety of form configurations can be achieved with this device. The change can be done easy and secured in less than two minutes. The settings will be displayed on the scale of the device. The embossing for the leads are tooling- specific. This tools are produced to meet customer requirements. The components are hand fed into the tooling. The component body has to be centered between the bending anvils. After the Foot pedal is depressed, the component leads are clamped on both sides. The leads are then cut to length and depending on the form shape the required lead features are put in the leads at this time. After that, the leads are bend to the 90° configuration. The processed component is then rejected by the front of the device. Components