Sewer cleaning hoses
GrüloJet 200
Description
Short description: PU sewer cleaning hose, 200 bar New in our product range is the thermoplastic sewer cleaning hose GrüloJet 200 with its pressure carrier, consisting of double-braided highly tearproof synthetic fibres and an extremely abrasion- and cut resistant polyurethane cover. With its working pressure of 200 bar the GrüloJet 200 is eminently suitable for use on sewer cleaning vehicles. Due to its extremely smooth thermoplastic lining the GrüloJet 200 shows an inferior pressure drop than customary rubber sewer cleaning hoses. Furthermore the lower weight gives you the possibility to increase your vehicle payload. All hoses are assembled with BSP female/male and ferrules. Delivery takes place with test certificate on each assembled hose.
Product characteristics
- Temperature range:
- -40 °C to +55 °C
- Standard length:
- 120 m, 160 m, 180 m, 200 m, 240 m
- Availability:
- DN 25 up to 350 m, DN 32 up to 250 m, NW 38 up to 200 m
- Colour:
- Light green
- Cover:
- Polyurethane, cut- and abrasion resistant
- Reinforcement:
- Highly tear-resistant synthetic fibres
- Lining:
- Thermoplastic elastomer
- Marking:
- [Ellipse G+L] GrüloJet 200 [Ellipse G+L] DN [..] I WP [...] bar I BP [...] bar
Documents
Similar products from GRÜNING & LOSKE GMBH
GRÜNING & LOSKE GMBH
Germany
Short description: The protection set This set offers you a high protection for sewer cleaning hoses. It prevents the sewer cleaning hose from abrasion during the insertion into the sewer tunnel. The set consists of one length of the polyethylene disposal hose with black synthetic cuffs on both sides, a 5m-length betalone line, fixed with shrinkdown plastic tubing out of polyolefine.
GRÜNING & LOSKE GMBH
Germany
Short description: Outstanding abrasion resistance GrüloKan 250 Premium offers you much more than all common rubber sewer cleaning hoses. The especially developed composite bi-layers structure of the cover enables a very high abrasion resistance according to EN ISO 6945 (50 N and 2000 cycles max. 1g). This guarantees you a long lifetime at equal flexibility in comparison to our classic GrüloKan 250. Therefore our GrüloKan 250 Premium can be used in any situation, where all others fail. All hoses are assembled with BSP female/male and ferrules. Delivery takes place with test certificate on each assembled hose.
GRÜNING & LOSKE GMBH
Germany
Short description: With polyamide inliner GrüloKan 250 Inliner offers you - besides all the advantages of a common rubber sewer cleaning hose - an extremely smooth polyamide inliner, which guarantees an obviously lower pressure drop. This minimisation of the pressure drop leads to a reduction of the engine speed which means considerable savings in fuel costs. This offers an efficiency benefit you should not miss! GrüloKan 250 Inliner is recommended especially for water conditioning and water recycling vehicles. All hoses are assembled with BSP female/male and ferrules. Delivery takes place with test certificate on each assembled hose.
GRÜNING & LOSKE GMBH
Germany
Short description: For your own safety GrüloKan 250 Protect offers you all the benefits of our classical rubber sewer cleaning hose GrüloKan 250. Furthermore the yellow protection layer underneath the cover makes it easier for you to handle a high pressure hose in acccordance with the requirements of working safety. As soon as the cover gets thinner - in consequence of the rough operating conditions - the yellow protection layer becomes visible and warns you that its time to change the hose. So you and your staff members are always on the safe side. All hoses are assembled with BSP female/male and ferrules. Delivery takes place with test certificate on each assembled hose.