Specific system to rewind the labels RTR

FP CHECK is a machine suitable for the treatment of self-adhesive labels in reel allows you to: - To rewind clockwise or counterclockwise on different spindle diameters - Count the labels through a progressive or regressive contactor - Check the presence of the labels and stop in the presence of a missing label Working as a rewinder allows you to rewind labels from rolls with max. diameter of 300 mm, wrapped internally or externally, with a core diameter ranging from 46 mm to 110 mm, to rolls with max. diameter of 300 mm wrapped internally or externally. The average speed of rewinding is more than 50 meters / minute. In the control function, a photocell allows in addition to counting of the labels, to check the presence of the labels and indicate its absence with the possibility of stopping for repositioning. The operation takes place without any setting but via the control unit that self-learns the label length. For transparent labels there is a ultrasound photocell.

The labels are read by two sensors that, self-learning by the microprocessor, automatically identify the difference in transparency between the label and the backing paper, presenting the label on the peeler almost completely detached. Withdrawing the label the next pop-up automatically. The control board also allows to stop the rotation of the motor coil is completed, or in case of breakage paper signaling the anomaly with a sound signal.

FP RWR is a series of reel-winders of self-adhesive labels in rolls built for industrial use, robust, completely made of steel, equipped with a large support base for a stable connection to the printer. Available in versions with a maximum width of 130 mm. or 230 mm. The expansion mandrel allows the use of internal cores from 40 to 110 mm. (76 mm for the BIG model) and rewind reels up to an external diameter of 300 mm (400 mm for the BIG model). An innovative dancer position detection system allows to perfectly follow the speed of the printer avoiding tears or continuous stops. It is possible to rewind in a clockwise or counter-clockwise direction and select the maximum speed range to be reached. Powered at 230V or on request 115V, it does not require a separate power supply. The microprocessor control board also allows to stop the rotation of the motor when the reel is finished or in case of paper breakage, signaling the anomaly with an audible signal.

FP-UWR is a series of self-adhesive roll-out labels in rolls built for industrial use, robust, completely made of steel, equipped with a large support base for a stable connection to the printer. Available in versions with a maximum width of 130 mm. or 230 mm. The expansion mandrel allows the use of internal cores from 40 to 110 mm. (76 mm for the BIG model) and rewind reels up to an external diameter of 300 mm (400 mm for the BIG model). An innovative system for detecting the position of the dancer allows to perfectly follow the speed of the printer avoiding tears or continuous stops. It is possible to rewind in a clockwise or counter-clockwise direction and select the maximum speed range to be reached. Powered at 230V or on request 115V, it does not require a separate power supply. The microprocessor control board also allows to stop the rotation of the motor when the reel is finished or in case of paper breakage, signaling the anomaly with an audible signal.