Speed Bulb® speed rivets

Up to 60 rivets per minute! – Endorsed by major customers! GESIPA® speed rivets are a cost-effective alternative to automation. Speed rivet technology is a joining method that requires access from only one side and which enables fast cycle times thanks to the preloaded rivets and automatic feed. Advantages • Large grip range • Reduced variation • Optimum hole filling capabilities and bearing stress • Ideally suited for transferring shear strengths with moderate clamping force • Ideal for: — LED light strips — Electronic/pcb assembly — Lightweight sheet metal structures — PC housings — Rating plates — Blind holes

A closed end rivet The rivet body of the GESIPA CAP ® blind rivet is absolutely air and watertight. Liquids cannot seep through, could however seep around the set rivet, if the setting hole is too large. Therefore great care must be brought to fullfi lling the hole tolerances. The GESIPA CAP ® blind rivet – The structure For technical reasons, the rivet mandrel of the GESIPA CAP ® blind rivet must be fi xed in the rivet body. However this means that the rivet body can only deform slightly during the setting process. As a result, the cap blind rivet only has marginal hole fi lling capability. However this is necessary to be able to compensate large bore-hole tolerances. The GESIPA CAP ® blind rivet – Tight connections with care The above-mentioned technical situations make careful preparation of the application imperative. The hole diameter should be as tight as possible to ensure a fl awless function in the application for a long period.

Working range The rivet setting tool is designed for setting standard speed rivets from 2.4 - 4.8 mm Ø of all materials, as well as up to 4 mm Ø in stainless steel. Technical data Traction power: 3,500 N at 6 bar Stroke: 26 mm Operating pressure: 5-7 bar Air hose connection: 6 mm Ø (1/4’’) Weight: 3.0 kg Advantages • Also perfectly designed for fixed installation in production lines or semi-automatic workstations • Very practical for processing blind rivets in positions that require a vertical rivet setting process • Can be suspended on a balancer • Quick setting process, fast rates • Safe working through disposable mandrel and optional automatic switchoff • Ergonomic handling for fatigue-free work • Light and compact design • Modular construction based on the TAURUS® design • Softgrip • Tool-free conversion (spreader nosepiece and spring)

Working range The rivet setting tool is designed for setting standard speed rivets from 2.4 - 6 mm Ø of all materials. Technical data Traction power: 6,500 N at 6 bar Stroke: 30 mm Operating pressure: 5-7 bar Air hose connection: 6 mm Ø (1/4’’) Weight: 3.3 kg Advantages • Also perfectly designed for fixed installation in production lines or semi-automatic workstations • Very practical for processing blind rivets in positions that require a vertical rivet setting process • Can be suspended on a balancer • Quick setting process, fast rates • Safe working through disposable mandrel and optional automatic switchoff • Ergonomic handling for fatigue-free work • Light and compact design • Modular construction based on the TAURUS® design • Softgrip • Tool-free conversion (spreader nosepiece and spring)