Storage systems - FIFO spiral buffer

The preferred field of application for the (gas) hydraulic industrial buffer (COMPENSER®) of the S-series is in the medium to heavy engineering industry sector. As a heavy duty shock absorber it is used in large crane systems (e.g. harbour crane, shipyard crane or container crane), metallurgical plants, rolling mills, loading systems or as end stop integrated in a rail buffer stop. Design & Function: The gas-filled inner tube 2 enters the outer tube 9. The damping medium flows from the pressure chamber 6 through the throttle orifices 8 of the metering tube 7 into the volume balance chamber 5. The separating piston 4 simultaneously moves in the direction of the impact cap 1 and compresses the nitrogen gas filling. In the gas space 3, the energy is stored which is required for the reset of the inner tube. When the inner tube 2 returns to the initial position, the separating piston 4 moves in the opposite direction and presses the damping medium back into the pressure chamber 6.

The FXMA2102UMX is an 8-channel, ultra-low power, voltage translator/buffer/repeater/isolator from ON Semiconductor. It is designed to provide a low-power, low-voltage solution for translating and buffering signals between two different voltage domains. It is ideal for applications such as automotive, industrial, and consumer electronics. Features: • 8-channel, ultra-low power, voltage translator/buffer/repeater/isolator • Low-power, low-voltage solution for translating and buffering signals between two different voltage domains • Supports up to 8V input voltage range • Low-power operation: <1µA typical • High-speed operation: up to 10MHz • High-impedance output: >1MΩ • High-impedance input: >1MΩ • High-voltage isolation: >2.5kV • ESD protection: >8kV Applications: • Automotive • Industrial • Consumer electronics • Battery-powered systems • Portable devices • Wearable devices • Medical devices

Belt conveyors are particularly successful in transporting bulk materials such as mineral ores, stone, sand and grain at high capacities and over long distances. A belt conveyor consists of an endless belt stretched between two drums. Belt conveyors are usually the most suitable solution when stacking material needs to be transported over long distances without stopping. They are used horizontally or with a low slope. The material to be transported can be sand or granule.

Provides the product transfer from a piece of equipment located upstream to a piece of equipment located downstream. Can be adapted according to your needs and capacities.