This involves a play-free electronic switching cam encoder (abbreviated to: NOCE) with a maximum of four galvanically separated switching outputs, which can be set by the customer and which are activated or deactivated depending on the relevant position of the drive shaft. A parameterisable multiturn absolute encoder with SSI interface plus the switching cam encoder printed circuit board with separate controller are integrated into the compact housing. The SSI interface can be preset, the code direction can be set and the switching outputs can be preset.
Germany
BERNSTEIN AG manufactured SR and SRM safety cable pulling switch devices as per IEC 947-5-5, DIN EN 60947-5-5 and ISO 13850 standards. These technical demand that when 'actuation' or the act of the breakage of the cable, there is automatic lock out as the switch moves to stop position, and reset for further use.
Request for a quoteGermany
The QuellTech laser sensor family Q4 or Q5 used for these tasks is generally mounted on an arm of a rotational axis, to scan along the complete 360° angle of the internal surface in a sequence of strips. The Q4 sensors can also be used to control the weld seam tracking itself for rapid setup and ease of use. Even during a project, the range and scope of the Q Series sensor demonstrates the advantages of a modular system to quickly adapt to project needs, where the smallest system has provided fast analysis of pipes as small as 105mm. The low power, with standard communication protocols, enable battery powered systems to transmit wireless data to other systems for review and cloud back up.
Request for a quoteTurkey
In line with the pattern demand, the technical drawings are given to the pattern shop in our structure or to the pattern manufacturers we have been working for years. Pattern measurements are reported to our customers and after approval, to be taken to the following mold.
Request for a quoteCreate one request and get multiple quotes form verified suppliers.