Germany
Manufacturer/ Producer
Germany
Oxygen combination sensor with built-in type S thermocouple and threaded connection. Applications (examples): The sensor is used, for example, in carburizing plants to control the C-level, in forging furnaces to control the air supply of the gas burners, or in the atmosphere of crematoria. The sensor is not heated. Therefore, a minimum operating temperature of 500 ° C is required. Material Order: Assembly: Connection head form A with M20x1.5 cable gland Pressure range: Ambient pressure up to 2 bar Temperature range: 520 ° C to 1300 ° C Connection: thread G3 / 4 "DIN 228 / thread G1" DIN 228 Thermocouple: 1 x Type S PtRh (10%) - Pt DIN EN 60584-1, Class 1 Protection tube: Ø 17mm Thermowell material: 99.7% Al2O3 Continuous zirconia tube as electrolyte Reference air connection: Ø 6,0 nozzle max 10 liters / hour Purge air connection: Ø 6,0 nozzle max 200 liters / hour Gas electrode: spiral / helix platinum wire Air electrode: spiral platinum wire
Request for a quoteGermany
Oxygen combination sensor with built-in Type S thermocouple and holding tube connection. The standard dimensions are connectors with 22 x 150mm or 27 x 150mm in stock. The sensor is not heated. Minimum operating temperature is 500°C Configuration: Connection head form A with M20x1,5 cable gland Pressure range: Ambient to max 2 bar pressure Fitting: Thread G3/4" DIN 228 Thermocouple: 1 x Type 01 - S PtRh(10%) - Pt DIN EN 60584-1, Class 1 Protection tube: Ø 17mm Protection tube material: 99,7% Al2O3 SAT tube: 1 Nominal length: 27.559 in ( 700 mm ) Weight: 2.425 lbs ( 1.1000 kg ) ECCN: N AL: N Commodity code: 90258080 Including : - Certificate of calibration in accordance to DIN EN 60584-1 with correction values from 150°C to 1320°C in 140°C steps. - Certificate of conformity including production data and Helium leak test results. - 4 years warranty against drift and thermocouple wire defects provided the ceramic tubes are not damaged.
Request for a quoteBesides many more patents, three key principles led to a technical and scientific breakthrough in temperature measurement technology. The first is the thermoelectric principle which redefined the way thermoelectric voltage is created. In a nutshell, the highest voltage occurs with the highest temperature gradients. The second principle concerns drift of the thermocouples, which had until then presented a significant problem in heat-treatment processes. Dr. Körtvélyessy changed the diameter of the two thermocouples. Ageing still occurs but now both wires age at the same pace so that the correct thermoelectric voltage is always produced. The third principle is the introduction of very thin and separate ceramic protective tubes into a connecting head in contrast to the thick ceramic protective tubes, which were common then and still are, and the introduction of an empty tube, which is fitted with a test thermocouple for checking purposes.
Manufacturer/ Producer
Grünspechtweg 19
13469 Berlin - Germany
China
Material: Amorphous, Semi-crystalline and Mineral Filled Semi-crystalline. PEEK (polyetheretherketone) Film Provides: ● High Temperature Performance ● Excellent Tribological Properties ● Broad Chemical Resistance ● High-Strength & Toughness ● Electrical Stability & Radiation Resistance ● Low Smoke & Toxic Gas Emission ● High-Purity, extremely low extractables Appication: ● Micro speaker diaphragm, dome tweeter. ● Presslire exchanger and senior oliaphragin. ● Aerospace high-speed rail insulation and TAB heat insulation components. ● Thrust washers for micro motors, gaskets for automobiles. ● High-temperature resistant label, pressure sensitive tape substrate. ● Insulation layer of electric vehicle battery. ● Flexible film surface heater. ● Wire, cable, insulation and wrcop sheaths.
Request for a quoteGermany
Equipped with an electronic bubble, the FTS 300 offers an exceptionally powerful and cost-effective solution for a wide range of general and specialized applications in construction and engineering.
Request for a quoteGermany
The powerful Theis digital theodolite DTC 5.1 is the perfect tool for the construction professional, equipped to handle a wide range of measuring tasks. With an upright image and laser plummet, the DTC 5.1 offers precise and accurate measurements. Additionally, the dual-sided target collimator adds to the overall efficiency of the device, making it a reliable and valuable addition to any construction site.
Request for a quoteGermany
Contract Manufacturing TC Domine is a dependable partner for the highprecision machining of components made of thermoplastics and glass fibre or carbon fibrereinforced plastic. Six modern CNC machines with up to five axes can machine components 6,140 mm long, 1,900 mm wide and up to 500 mm high. As such, we are able to design and manufacture the necessary parts inhouse. Subsequent processing steps such as gluing, painting and assembling addon components are an integral part of what we do.
Request for a quoteCreate one request and get multiple quotes form verified suppliers.