TSD225/3 Baltograph
Mobile & Stationary
Description
The TSD225/3 is a very small focus dual filament monopolar tube for light alloys, composites or small steel thicknesses. The extremely small size of the small filament is designed for applications with magnifications or where definition is of first importance. This tube can be the ideal replacement of a µ Focus solution if the dose output of the µ Focus is not sufficient to cancel the natural noise of X-ray photons. This tube is perfectly adapted to Radioscopy applications or low power generators. Slightly larger than a 160 tube, the housing diameter is only 124 mm which will ensure that the tube can still be inserted even in tiny spaces. The tube shielding is internal and reduces the radiation leakage to less than 1 R/h @ 1 m as required by International standards. In and out fluid inlets are mounted with universal connectors while the HV plug cone is a R24. This tube can be used with all brands of generators provided that the load curve can be adapted. See our specialists if...
- Baltograph
- Mobile and stationary
Product characteristics
- Tube type
- Metal Ceramic
- Beam angle
- ° 40° x 30°
- Cooling mode
- Water
- HV Connector
- R24
- Nominal power
- W 800 / 1800
- Inherent filtration
- mm 0,8 Be
- Target angle
- ° 11°
- Leakage*
- mSv/h@1m 10
- Cooling flow rate
- l/min. 4
- Weight
- Kg 11
- Max. Current @ kV Max.
- mA 3,5 / 8
- Focal spot (EN12543)
- d 0,4** / 1
- Max. Current
- mA 14,5 / 30
Documents
Similar products from BALTEAU NON DESTRUCTIVE TESTING
BALTEAU NON DESTRUCTIVE TESTING
Belgium
The XLMD225 is a mobile version of our XLD225 generator offering the flexibility of a mobile unit but as stable and sturdy as a stationary unit. It also gives you more flexibility than a portable unit in places where room for the tubehead is reduced. It has been specially designed and optimized for real time applications and offers an extremely high dose stability to produce quality images comparable to conventional X-ray films. A very high duty cycle and a wide variety of tubehead is available, therefore the unit can be easily turned into a Panoramic or a Directional X-ray equipment with different focal spot sizes and can drive up to two individual filaments. Lightweight and highly flexible, that makes it the ideal selection for all castings and medium walled steels. Equipped with the HAND-XD or the DC1, the XLD225 is very easy to use and can also be driven by the X-Ray Remote Control (XRRC) software.
BALTEAU NON DESTRUCTIVE TESTING
Belgium
The XLMD160 is a mobile version of our XLD160 generator offering the flexibility of a mobile unit but as stable and sturdy as a stationary unit. It also gives you more flexibility than a portable unit in places where room for the tubehead is reduced. It has been specially designed and optimized for real time applications and offers an extremely high dose stability to produce quality images comparable to conventional X-ray films. A very high duty cycle and a wide variety of tubehead is available, therefore the unit can be easily turned into a Panoramic or a Directional X-ray equipment with different focal spot sizes and can drive up to two individual filaments. Lightweight and highly flexible, that makes it the ideal selection for all castings and medium walled steels. Equipped with the HAND-XD or the DC1, the XLD160 is very easy to use and can also be driven by the X-Ray Remote Control (XRRC) software.
BALTEAU NON DESTRUCTIVE TESTING
Belgium
The XMD225/4KW gives the flexibility of a mobile unit and and is as powerful, stable and sturdy as a stationary unit. It gives you more flexibility than a portable unit in places where room for the tubehead is reduced. The XMD225/4KW is the mobile version of the XSD225/4KW, first unit of a complete set based on a solid insulation HV module. This technology not only frees you from very specialized service operations but also guarantees that you will be able to get the most out of your machine at any time. A very high duty cycle and a wide variety of tubehead is available, therefore the unit can be easily turned into a Panoramic or a Directional X-ray equipment with different focal spot sizes and can drive up to two individual filaments. Combined to our computerized control panel (LS1) it can be integrated in all kind of environment, for instance it can replace the majority of existing units without big changes or any.
BALTEAU NON DESTRUCTIVE TESTING
Belgium
The XMD160/4KW gives the flexibility of a mobile unit and and is as powerful, stable and sturdy as a stationary unit. It gives you more flexibility than a portable unit in places where room for the tubehead is reduced. The XMD160/4KW is the mobile version of the XSD160/4KW, first unit of a complete set based on a solid insulation HV module. This technology not only frees you from very specialized service operations but also guarantees that you will be able to get the most out of your machine at any time. A very high duty cycle and a wide variety of tubehead is available, therefore the unit can be easily turned into a Panoramic or a Directional X-ray equipment with different focal spot sizes and can drive up to two individual filaments. Combined to our computerized control panel (LS1) it can be integrated in all kind of environment, for instance it can replace the majority of existing units without big changes or any.