The TS workpiece touch probes fromHEIDENHAIN help you perform setup, measuring and inspection functions directly on the machine tool. The stylus of a TS touch trigger probe is defl ected upon contact with a workpiece surface. At that moment the TS generates a trigger signal that is transmitted either by cable, an infrared or radio beam to the control. The control simultaneously saves the actual position values as measured by the machine axis encoders, and uses this information for further processing. HEIDENHAIN touch probes are available in various versions for workpiece measurement on machining centers, milling, drilling, boring machines and CNC lathes.
Germany
On request, we can integrate all of our interferometer systems into our UP machine for quality control in one setting. Be it with a simple strip display or a fully automatic strip evaluation for visualizing the 3D topography. The technical specifications of the intermeter systems are identical to the stand-alone systems.The larger travel range of the MMC900 offers the option of mounting a 6 “interferometer next to the Z axis. After machining the workpiece, the X-table is moved under the interferometer and the surface is measured.
Request for a quoteSwitzerland
The manufacturing precision of the roller has a major influence on the quality of the final product (wires) as well as on the service life of the rollers. It is therefore essential that the ground “V” groove on the outer ring is machined and positioned precisely relative to the internal geometry. WIB only produces straightener roller bearings produced in this fashion, while many other producers machine the outer wire guide groove after assembly
Request for a quoteGermany
The rotary table combination RT3A100 consists of two directly driven rotary tables of the RT3A100 series. The B-axis has a swivelling range from approx. -10° to +110°; the C-axis can be rotated infinitely. The unit is driven by two integrated 3-phase synchronous motors. The drive guarantees highest dynamics and precision. An innovative clamping unit integrated in the housing guarantees high holding forces when the drives are switched off without position changes on the axes. By means of compressed are impact, the holding torque can be increased from 15Nm to 20Nm for special applications. The complete system is supplied as ready-to-connect unit.
Request for a quoteCreate one request and get multiple quotes form verified suppliers.