Turkey
Manufacturer/ Producer
Turkey
-COILS GRADE: AISI 303 / 304 / 304L / 316 / 316L / 316TI / 310 / 310S / 321 /430 MEASUREMENT: THICKNESS : 0.40 mm - 6 mm WIDTH: 350 mm - 1600 mm FINISH: 2B, BA, 3N, 4N, 5N, SCOTCH BRITE, HAIRLINE, DUPLO - NARROW COILS GRADE: AISI 303 / 304 / 304L / 316 / 316L / 316TI / 310 / 310S / 321 /430 MEASUREMENT: THICKNESS : 0.30 mm - 3 mm WIDTH: 210 mm - 900 mm FINISH: 2B, BA, 3N, 4N, 5N, SCOTCH BRITE, HAIRLINE, DUPLO - STRIP COILS GRADE: AISI 303 / 304 / 304L / 316 / 316L / 316TI / 310 / 310S / 321 / 430 MEASUREMENT: THICKNESS: 0.30 mm – 3 mm WIDTH: 10 mm - 210 mm FINISH: 2B, BA, 3N, 4N, 5N, SCOTCH BRITE, HAIRLINE, DUPLO
Request for a quoteTurkey
- AUSTENITIC ALLOY SHEETS GRADE: AISI 201 / 301 / 304 / 304L / 310 / 310S / 316 / 316L / 316TI / 321 MEASUREMENT: THICKNESS: 0.4 mm - 6 mm WIDTH: 350 mm - 1600 mm LENGHT: 300mm - 6000 mm FINISH: 2B, BA, 3N, 4N, 5N, SCOTCH BRITE, HAIRLINE, DUPLO - FERRITIC ALLOY SHEETS GRADE: AISI 409 / 430 / 434 MASUREMENT: THICKNESS: 0.40 mm - 6 mm WIDTH: 350 mm - 1600 mm LENGHT 300mm - 6000 mm FINISH: 2B, BA, 3N, 4N, 5N, SCOTCH BRITE, HAIRLINE, DUPLO -DUPLEX GRADE: AISI 2205 / 2001 MEASUREMENT: THICKNESS: 0.40 mm – 3mm WIDTH: 350 mm - 1600 mm LENGHT: 300mm - 6000 mm FINISH: 2B, BA, 3N, 4N, 5N, SCOTCH BRITE, HAIRLINE, DUPLO
Request for a quoteTurkey
6 types of surface applications can be done within 450mm-1600mm width, 0.4mm-3mm thickness from coil to coil or 450mm-1600mm width, 0.5mm-4mm from sheet to sheet.
Request for a quoteTurkey
Coils with thickness between 0.3 mm - 3 mm are cut in widths between 21 mm - 1600 mm.
Request for a quoteManufacturer/ Producer
IVEDIK OSB ARI SAN SIT. 1476 CAD. NO: 59
Yenimahalle
06378 Ankara - Turkey
France
Plate die-cast zinc or stainless steel 1.4305. Anti-slip plate thermoplastic elastomer. Version: Die-cast zinc plate, black powder-coated. Stainless steel plate, bright. Note: Swivel feet consist of a plate and a threaded spindle or ball joint. Any plate can be combined with any threaded spindle or ball joint. The anti-slip plate absorbs vibrations and prevents the swivel foot slipping. For matching threaded spindles see 27810. For matching ball joints see 27811.
Request for a quoteFrance
Stainless steel 1.4404. Version: Satin finished. Note: The hinges are made of weldable profile steel. The pin is fixed into the lower part of the hinge. The differing steel qualities of the weld and the beam onto which the hinge is welded must be at least equal to or better than: Stainless steel 1.4404
Request for a quoteFrance
Stainless steel 1.4305 Lamellar insert polyamide (PA6). Seal ring CR / NBR. O-ring NBR. Version: Bright. Note: DIN EN 60423 cable glands with metric thread. Sealing and tension relief are provided by inset fins and a sealing washer. Rating IP68 (5 bar for 30 min). Cable glands are used for connecting fixed calbes and lines in housings, distributors and switch boxes. Temperature range: Static: -40 °C to +100 °C. Dynamic: -20 °C to +100 °C.
Request for a quoteFrance
Coupling stainless steel 1.4057. Screws stainless steel 1.4301. For applications that require a small construction volume and low surface pressure. The keyless locking coupling can be fully recessed in a hub connection. for shaft diameters 6 20 mm suitable for hubs with low wall thickness minimum axial offset possible selfcentring Assembly Lightly oil keyless locking coupling on the tapered faces and contact points of the shaft and hub. Do not use MoS2 or grease. Insert keyless locking coupling in the hub seat and slide onto shaft. Tighten screws crosswise in several increments to the defined tightening torque. Dismantling Remove all screws and screw into the extraction threads of the front flange. Tighten screws crosswise in several steps until the keyless locking coupling loosens. Tolerances Shaft Recommended tolerance h8. Surface quality Rz ≤ 16 µm. Hub Recommended tolerance H8. Surface quality Rz ≤ 16 µm.
Request for a quoteCreate one request and get multiple quotes form verified suppliers.