VAO puremaxLED®

The intrinsic quality of the various components, sub-assemblies and software is checked at each stage of design and manufacturing. During the pre-validation phases, performance, durability, and efficiency goals are meticulously assessed and cross-checked with the obligations defined in the specifications. These efficiency targets are cross-referenced and verified with our customer upon commissioning of the equipment, following the implementation of a duly developed validation protocol.

Particular Challenges of the Application: By tactile equipment, determination of the deepest point on a rough metal surface is neither simple or precise. As a consequence, often either too much material is removed, or the surface is still covered with defects which have to be eliminated by a following milling cycle. The equipment is arranged in parallel, so that the complete width of the slabs is covered. The sensors are calibrated to a common coordinate system and mounted on a movable gantry. Before measurement, the slabs are fixed in place. The scanners mounted on the gantry are guided over the measuring object, driven by an electric motor. The point cloud recorded by the four scanners is consolidated in a PC by means of the QuellTech image processing software which calculates the difference between highest and lowest point of the corresponding surface and compensates for possible inclination of the slab (detrending).

We have a skilled quality control team and a laboratory that enables us to carry out trials and tests to ensure the quality of raw materials and finished products. As soon as we receive the raw materials, we carry out the necessary tests to ensure that they comply with the specifications provided by the suppliers. Monitoring and controlling the manufacturing process Ensuring traceability of manufactured products Ensuring that finished products comply with CTRA standards and/or customer specifications by carrying out various in-process checks. Non-destructive testing Visual / Dimensional Polymerisation Destructive testing Calcination test (loss on ignition) > in-house Peel test (separation) > in-house Tensile test > carried out by an approved external body Bending test > carried out by an approved external body