VisionPro ViDi

The accessories use for mechanical housing.

Defects to be examined in this application are very small, their size is often lower than 0.5 mm – hard to discover by human eye. Rework in the course of the production of the final product however, proves to be complicated and expensive. Large rolls with a diameter of 2 m and a length of 10 m are very difficult to remove and to reinstall. In order to avoid corresponding inconveniencies, it is essential to support the manufacturing process of the rolls themselves by a reliable quality control in the form of an automated final inspection.As the Quelltech Q6 laser scanner features an extremely precise resolution of 4096 Pixels/Profile at a high scan rate, this model proved to be able to meet the requirements and was mounted onto the positioning stage of the grinding machine. Furthermore, an industrial measurement computer was added, used for the analysis software of the point cloud. On the basis of this configuration, the entire roll surface could be recorded on a helical path.

Germanium wafers are a semiconductor material & therefore are a smart choice for microelectronics. Due to its unique electric properties, it is widely used for sensors, solar cells and infrared optical applications. The wafers are also great for microelectronics as the space is limited and being available in 500μm or less it makes it perfect to achieve the high quality results required. It’s thermal conductivity makes it a good alternative to silicon. Our stock wafers are produced as thin as 500μm and provide exceptional surface quality. However, we can manufacture to a fully customised specification with a wafer thickness as little as 10 μm. Typical specifications of our germanium wafers are: 10mm – 150mm in diameter <500μm in thickness Doped and undoped Germanium

With the robot camera Eyes from OnRobot, the provision of image processing for almost all collaborative applications becomes easy and cost-effective. Eyes is suitable for the sorting of a large number of objects. For example for CNC machines with metal parts defined by their outer shape and many other pick-and-place applications where alignment is important. Calibration and part recognition with only one single shot takes only a few minutes. Programming is intuitive and fast. And with Eyes’ advanced, affordable 2.5D vision, you benefit from depth perception and the ability to stack parts without adding complexity. The simple one-system setup for all leading robot manufacturers comes with software that is easy to install and program. Even employees without a technical background can perform the setup. Calibration and part recognition with a single shot. Simply take an image of the work surface to calibrate the camera view. One image for each part you want the system to detect.