WIWOX® 340 Cleaning chemical Industrial neutral cleaner
For further data on the product, please refer to the data sheet or contact us.
Description
WIWOX® 340 is a weakly alkaline cleaning agent for grease, oil and oil carbon soiling. Very suitable for pre-cleaning or basic cleaning of soiled steel, cast iron and non-ferrous metal or plastic parts in an ultrasonic bath or in a spray cleaning system. After cleaning and without water rinsing, the parts are temporarily protected against corrosion. The final drying can be accelerated by blowing off with compressed air, a warm air flow or treatment in a drying cabinet. WIWOX® 340 can be used in a concentration of 5 – 7 %. Dilution with water depends on the degree of contamination and the intended exposure time. The bath should have a temperature of approx. 60° C. The bath should be kept at a constant temperature. In the field of precision mechanics, longer exposure times are possible depending on the degree of contamination.
- Precious and semiprecious stones and pearls
- Ultrasonic cleaning chemicals
- Industrial cleaning of tools and components
Similar products from WIWOX GMBH SURFACE SYSTEMS
WIWOX GMBH SURFACE SYSTEMS
Germany
WIWOX® 410 is a liquid, alkaline mould cleaning agent for the removal of burnt rubber and plastic residues from metallic surfaces. It is also used as a paint stripper. WIWOX® 410 is used undiluted for immersion cleaning of metal moulds. The construction material for the tank can be sheet steel or stainless steel. The tank size depends on the moulds to be cleaned. The pool can be heated from the outside or inside by a heating coil. The processing temperature is generally approx. 80° C. The processing time depends on the degree of soiling and the type of soiling between 10 – 30 minutes.
WIWOX GMBH SURFACE SYSTEMS
Germany
WIWOX® 250 is a very alkaline cleaning concentrate for organic (oil, coal, grease etc.) and inorganic (magnesium, lime etc.) residues on tools and moulds. It can be rinsed off residue-free without a film on the surface. The concentration depends on the working conditions, the degreasing time, the degree of soiling, etc. (between 5 – 30 %). Regular replenishment by checking the bath can prolong its service life. In contrast to powder concentrates, lthe iquid formulation allows convenient use without danger of exothermic reaction in the plant.
WIWOX GMBH SURFACE SYSTEMS
Germany
WIWOX® MT micro blasters are used for precise blasting with blasting nozzles from 0.4 – 1.8 mm. Surfaces can be smoothed, matted, deburred or cleaned. All mineral media, e.g. glass beads, broken glass, corundum, silicon carbide in the grain size range from 0 to 300 mμ serve as blasting media. The abrasive is used only once. The blasted surface is reproducible. Only a compressed air connection is required to operate the equipment. Micro-Tip fine blast units are suitable as portable free blast units or in combination with a blast cabinet. Micro-Tip fine blasting technology is available as a pressure or injector process. All units are equipped with foot pedal, pressure regulator, manometer and carbide nozzles.
WIWOX GMBH SURFACE SYSTEMS
Germany
WIWOX® PYRO paint stripping and decoating oven for particularly large and heavy batches. Particularly powerful furnace technology for the highest demands. With state-of-the-art IPC control and industrial burner technology. This furnace series enables clean, reproducible process parameters as well as state-of-the-art exhaust gas treatment.