Fluid : Water Switching flow rate : 2.5LPM/2.0LPM ( can be changed by customer's request) Range of water rate : ~30 LPM Electrical rating : 5VDC, 12VDC, 24VDC, 110V / 220V, 50VA. 1A (Net resistor load). Pipe connection : 1/2", 3/4" (Options : 25A and 32A) Approval : CE Made in Korea
Spain
Domestic and commercial heating with hot air boilers with natural gas or propane operation Our hot air boilers are ideal for domestic and commercial heating of premises from 370m3 to 840m3. Our hot air boilers can work with natural gas or propane gas and have a sealed combustion system, that is, the air used for combustion is from the outside and in this way the air from the room to be heated or from the air is not used. living place. Our hot air boilers can diffuse the hot air directly or a network of ducts can be applied to distribute the hot air in the different rooms of the house.
Request for a quoteNetherlands
The automatically functioning thermal oil boilers are designed for thermal oil with a temperature of up to 400 °C. The thermal oil boiler contains a double rear wall that cools the thermal oil and is part of the VO. This makes a high boiler efficiency of 93% achievable and you will notice this in the gas consumption. Due to the lack of a bricked rear wall, periodic checks of the rear wall are not necessary. As a result, you save on maintenance. Electric thermal oil boilers are also part of our program. All thermal oil boilers can be equipped with all common gas or oil burners both ex works and on site. the burner The installation is supplied as high/low or modulating , depending on the capacity of the Inplan thermal oil boilers .s
Request for a quotePortugal
Fixing part of the boiler Welded in position PB 2F, MIG-MAG on a stainless steel and iron passageway. The fixing part of the boiler is welded with a part of stainless steel pipe and a part of metal pipe according to all standards and requirements for this type of MIG-MAG welding work.
Request for a quoteTurkey
It is designed to give water into the wheat during the tempering of the wheat. The semi-mechanically operating system is mounted on forced annealing machines or internal leak screw screw. The water to be supplied to the system is first filtered and cleaned, and the sensor detecting the flow of wheat delivers the amount of water whose flow rate is adjusted beforehand to the system by opening the solenoid valve, the sensor closes the solenoid valve when the flowing wheat is cut. There are various types of flowmeters, and special types are manufactured according to the application place and flow. Application Fields ◾ At food processing industry ◾ Flour and semolina mills ◾ Macaroni factories ◾ Feed mills ◾ At other similar industrial plants
Request for a quoteCreate one request and get multiple quotes form verified suppliers.